New front components????
-
- Posts: 10
- Joined: Thu Jun 19, 2008 2:07 am
- Location: Cameron Highlands
New front components????
Hi ter...i m currently havind rsd comps in front powered by rsd250.2....behind i have rsd 12" subs powered by rsd1200.1...i m looking to change my front comps..i have been using them for sum time so i wanna change...i gotta a few options in hand...i wud love to hear wat u guys have to say abt them....
1) focal 165a1
2) boston acoustics sr60
3) polk audio mm6501
4) rainbow slx265 deluxe
5) rockford t1652-s
6) jl audio xr650csi
Thanks...
1) focal 165a1
2) boston acoustics sr60
3) polk audio mm6501
4) rainbow slx265 deluxe
5) rockford t1652-s
6) jl audio xr650csi
Thanks...
If I had to change anything as far as comps here is what I would do:
Mids: http://www.diycable.com/main/product_in ... 529acfe85b
Tweets: http://www.parts-express.com/pe/showdet ... r=264-1018
Custom Crossover due to the 6 Ohm mid, 4 ohm tweet. Or easier still go active.
Or just keep the RSd tweets, I think they are decent and silky
Mids: http://www.diycable.com/main/product_in ... 529acfe85b
Tweets: http://www.parts-express.com/pe/showdet ... r=264-1018
Custom Crossover due to the 6 Ohm mid, 4 ohm tweet. Or easier still go active.
Or just keep the RSd tweets, I think they are decent and silky

2003 Saab 9-3 Vector: Faital, Dayton, JBL,+ DIY mixed up mess
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
- oldskoolmseriesfan
- Sherlock Homey
- Posts: 2517
- Joined: Sun Oct 19, 2008 10:03 pm
- Location: WEST SIIIIDE!!
They just came out maybe a week ago. I have not purchased them yet, but hope to once I sell some of my other gear.
... Please buy some of my stuff so I can buy more speakers! LOL
mids in action with 1000 watts!:
http://www.youtube.com/watch?v=RRSdoHis ... r_embedded
Matched with this 21" Maelstrom-X in a sonotube
http://www.youtube.com/watch?v=JMDiBspK ... re=related
Good stuff!
... Please buy some of my stuff so I can buy more speakers! LOL
mids in action with 1000 watts!:
http://www.youtube.com/watch?v=RRSdoHis ... r_embedded
Matched with this 21" Maelstrom-X in a sonotube

http://www.youtube.com/watch?v=JMDiBspK ... re=related
Good stuff!
2003 Saab 9-3 Vector: Faital, Dayton, JBL,+ DIY mixed up mess
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
-
- Posts: 10
- Joined: Thu Jun 19, 2008 2:07 am
- Location: Cameron Highlands
-
- Posts: 10
- Joined: Thu Jun 19, 2008 2:07 am
- Location: Cameron Highlands
dun get me wrong,the rsd's are great...but i m looking for a change...sumthing better....the rsd's r good...im wondering if any of the comps i mentioned can giv a more fluid midrange n more transparency??i m leaning towards vocals n instruments esp percussion....can u guys list the pros n cons of the comps..thanks guys
itwm
Focal is very well know for fluid mid range and transparencymasterlock wrote:dun get me wrong,the rsd's are great...but i m looking for a change...sumthing better....the rsd's r good...im wondering if any of the comps i mentioned can giv a more fluid midrange n more transparency??i m leaning towards vocals n instruments esp percussion....can u guys list the pros n cons of the comps..thanks guys
I found the jl to be a little to much mid bass but i bought the first set when they came out in `1999 i worked with a company that sold jl
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Scott check this link out: http://www.hometheatershack.com/forums/ ... oices.html
Ideally they want the Anarchy crossed at 1500Hz. Their curves look good, but I think it is a very low crossover point... Not sure how it would actually sound.
Scott please keep us posted on how the Anarchy works for you! I am very curious
Misfire, check this spec doc out:
http://www.diycable.com/main/pdf/AnarchyDocs.pdf
93mm deep, so pretty deep.
Ideally they want the Anarchy crossed at 1500Hz. Their curves look good, but I think it is a very low crossover point... Not sure how it would actually sound.
Scott please keep us posted on how the Anarchy works for you! I am very curious

Misfire, check this spec doc out:
http://www.diycable.com/main/pdf/AnarchyDocs.pdf
93mm deep, so pretty deep.
2003 Saab 9-3 Vector: Faital, Dayton, JBL,+ DIY mixed up mess
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
- deathcloud
- Posts: 680
- Joined: Sun Jul 06, 2008 10:47 am
god that 6.5 looks so beefy. But I am going to go the route of active soon and plan on getting mach5audio mli65 with a seas 27tff
mli65
http://www.audiojunkies.com/product/844 ... 65-reviews
seas tweeter
http://www.madisound.com/catalog/produc ... ts_id=1466
This will be my first active set up and I am very excited to see what these babies can do.
Plan on running the 6.5 from 80hz-2000hz and the tweets 2000hz and up
Should be pretty sweet. But the main thing is I have heard excellent things about both products especially the mli65. I will let u guys know how it does.
btw I still have to get started on my review of the SSA icon 12 in a 2.25 cf tuned to 32hz. 1 word. perfection.
mli65
http://www.audiojunkies.com/product/844 ... 65-reviews
seas tweeter
http://www.madisound.com/catalog/produc ... ts_id=1466
This will be my first active set up and I am very excited to see what these babies can do.
Plan on running the 6.5 from 80hz-2000hz and the tweets 2000hz and up
Should be pretty sweet. But the main thing is I have heard excellent things about both products especially the mli65. I will let u guys know how it does.
btw I still have to get started on my review of the SSA icon 12 in a 2.25 cf tuned to 32hz. 1 word. perfection.
Kenwood Excelon x592
x200.4(in process of repair OMFG YES)
rsd65cs front
rsd65cs rear
x1200.1
2 rsdc124
using zx350 until repair of x200.4
x200.4(in process of repair OMFG YES)
rsd65cs front
rsd65cs rear
x1200.1
2 rsdc124
using zx350 until repair of x200.4