"The Outlaw" install!

Have a cool car stereo? Post your install pictures here! No PG? No problem! Competition grade or sub-in-box setups: ALL are welcome!
Post Reply
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

"The Outlaw" install!

Post by marko »

amp swap from hifonics is now complete, back with the old school PG's :love: 2x Outlaws with fresh power supply caps fitted :smokin: m100 powering velodyne (calibrated today and up and running), m50's bridged on midbass and m100 powering beryllium mids and tweeters through crossblock bi-amped. no music yet as i havn't started the new A pillars yet..
Attachments
DSCN3779.JPG
DSCN3779.JPG (168.89 KiB) Viewed 13358 times
DSCN3776.JPG
DSCN3776.JPG (185.31 KiB) Viewed 13358 times
DSCN3778.JPG
DSCN3778.JPG (197.34 KiB) Viewed 13358 times
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
Rold Gold
Dirty Harry
Posts: 5685
Joined: Sat Jan 26, 2008 11:53 pm
Location: Oregon Grown

Post by Rold Gold »

:shock: :drool: :clap: :clap:
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

FuzzyHoNutz wrote::shock: :drool: :clap: :clap:
did you notice the mint ax204a :wink: wish i had room for the eq232 as well, might have to fit the zapco 1/2 din eq's instead up front :hmm:
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
joerg
SOFA-KING
Posts: 5351
Joined: Sat Nov 29, 2008 11:54 am
Location: Graz, Austria

Post by joerg »

Very nice and smooth install! 8) 8) 8) What kind of sub is that? And what car´s trunk are we looking at?
Music is silver, PHOENIX is GOLD
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

it's an Audi A4 avant. the sub is a rare servo controlled velodyne df12sc 8)
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
Bfowler
Briaans..... BRIAAAAANNNNNNS
Posts: 10769
Joined: Wed Dec 06, 2006 11:06 am
Location: So easy, a cavewomen could do him

Post by Bfowler »

fuckin a...as we love to say in merica....thats really really nice man
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
Top
User avatar
Rold Gold
Dirty Harry
Posts: 5685
Joined: Sat Jan 26, 2008 11:53 pm
Location: Oregon Grown

Post by Rold Gold »

WERD!!!!!!
That's a super-sexy install man....
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
Top
User avatar
Thunderdome
Posts: 806
Joined: Mon Feb 09, 2009 4:19 pm
Location: Ont.

Post by Thunderdome »

very nice work man, I remember them subs from back in the day
Top
User avatar
paintguy
Posts: 159
Joined: Fri Dec 29, 2006 12:57 pm
Location: Sheffield, UK

Post by paintguy »

Very nice Mark. Very nice indeed.
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

cheers guys! this is the 1st install i've done for a while in which i'm really happy with choice of kit and looks too, the outlaws look the buisness in real life 8)
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
paintguy
Posts: 159
Joined: Fri Dec 29, 2006 12:57 pm
Location: Sheffield, UK

Post by paintguy »

marko wrote:, the outlaws look the buisness in real life 8)
I still need your soldering skills on that little job I mentioned a while back, so hopefully I'll get to see them myself if I ever get the thing removed! :)
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

paintguy wrote:
marko wrote:, the outlaws look the buisness in real life 8)
I still need your soldering skills on that little job I mentioned a while back, so hopefully I'll get to see them myself if I ever get the thing removed! :)
forgot all about that, just give us a shout when you want to sort it 8)
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
paintguy
Posts: 159
Joined: Fri Dec 29, 2006 12:57 pm
Location: Sheffield, UK

Post by paintguy »

Cheers mate.

This is how not to do it (scroll down :shock: ). And yes, it's the same guy from TA.


Anyway, on with the Outlaw loving...
Top
User avatar
Misfire
Posts: 1170
Joined: Thu May 14, 2009 12:35 pm
Location: Oregon

Post by Misfire »

Very sweet install indeed! That sub looks killer! Very clean.
MS275, MS2250ta, MS2125TA, Bandit, M44, ZX200, EQ215, EQ230, TX2, PDL1, TBAT Trans+Recvr w/cable
Top
User avatar
bretti_kivi
Shutterbug
Posts: 1595
Joined: Tue Aug 26, 2008 1:06 pm
Location: Päijät-Häme or Uusimaa

Post by bretti_kivi »

that was a fantastic solder job there...

Marko, the install looks great. I might be over at the beginning of July and actually have some time, would be cool to meet you. Maybe take a couple of snaps of the install, too :)

Bret
Top
User avatar
kg1961
Got wood?
Posts: 9051
Joined: Sun Apr 06, 2008 10:31 pm
Location: Calgary

Post by kg1961 »

Marko So why that sub? I tried to read as much as i could about it but it need a big sealed box
why do you keep using it? has anyone else heard them? they are very rare and pricey

very very nice install
most of my gear is gone :liar:
2020 honda accord sport
Top
User avatar
12voltjunky
Posts: 565
Joined: Tue Dec 15, 2009 5:10 pm
Location: Atlanta, GA

Post by 12voltjunky »

Right On Man :clap:
1- Zx 400 Ti
1- Ti 600.2
1- Ti 500.4 (resurrected by valeks1)
2- Ti 500.4
2- Ti 1000.2
2-Ti RMD, Lpl, PG 1/0 Ga
Ti 6.5 comps, Ti 5x7 coaxials
Top
User avatar
bruther
Posts: 607
Joined: Wed Mar 12, 2008 7:18 am
Location: DC
Contact:
Contact bruther

Post by bruther »

Marko,
This is my dream system ....with a couple of Bandits....H...E...A...V...E...N


Very nice!
1-Phoenix Gold Outlaw
1-Phoenix Gold Bandit
Top
User avatar
twisted
Fordtough's Boyfriend
Posts: 2542
Joined: Wed Dec 06, 2006 3:26 pm
Location: the vast unknown

Post by twisted »

damn that is sexy sir :mrgreen:
Top
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14797
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

smooth install for sure. How did you build the part between the false floor and the woofer? is that fiberglass or some other way?
what else can I say I am a grumpy asshole most of the time.
Top
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:
Contact stipud

Post by stipud »

Wooow another Marko install. Sweet :D

Do you plan a rack to mount over it, so you can still use the boot?
Top
User avatar
waynehead
No, you're a towel.
Posts: 938
Joined: Fri Aug 01, 2008 8:26 am
Location: Butthole of Ohio

Post by waynehead »

If you are jealous raise your hand :cheers:
We don't need no stinkin' bass boost!
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

stipud wrote:Wooow another Marko install. Sweet :D

Do you plan a rack to mount over it, so you can still use the boot?
what you mean like this one :wink:
Attachments
20100314_004.jpg
20100314_004.jpg (56.49 KiB) Viewed 13243 times
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

kg1961 wrote:Marko So why that sub? I tried to read as much as i could about it but it need a big sealed box
why do you keep using it? has anyone else heard them? they are very rare and pricey

very very nice install
there's no other sub like it for pure sq, incredible accuracy!

it plays in a 1.7cf sealed enclosure that is the full size of the wheel well and made up of about 10 layers of mdf so incredibly strong, no flimsy fibreglass enclosure here :wink:
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
Tiger
Posts: 460
Joined: Wed Dec 23, 2009 7:26 am

Post by Tiger »

Forgive me for asking.. what sub is that?

And THAT is a truely brilliant install! Super clean.. and I'm tipping that the sound will match the look, no doubt, :)
-1998 Mazda 929 HC Series 1-
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
Top
Post Reply

Return to “Installs”