Fan shroud for M series

tonym · Post by **tonym** » Tue May 11, 2010 1:07 pm

I took a set of mine down to a place here local.
I can have them made exactly the same but need 20 sets to get the price down.

would anyone be intrested?
20 sets would cost around 200.00 a set and the shroud part would be 20.00

These would be in RAW form NO PAINT, NO POWEDER COAT

These can be made out of 18g metal or aluminium.....

After I tell him go it would be 2-3 weeks to make..

Post by **Rold Gold** » Tue May 11, 2010 1:48 pm

I'll take a set for my 100/44...........

But don't play with my emotions man.................

itchnertamatoa · Post by **itchnertamatoa** » Tue May 11, 2010 3:25 pm

mmm, that would be tempting
I'd be in for 2, 5 maybe

HoseHead · Post by **HoseHead** » Wed May 12, 2010 5:05 am

Like these? With the "Phoenix" Gold cut-out stamped in the shroud?

Post by **mhyde71** » Wed May 12, 2010 6:01 am

is this (that deal) include 2 fans housings also? or are we not there yet>? and this is just for the shroud over the heat sink?

BUT wait! - who can we have do the powder coating???

Post by **Eric D** » Wed May 12, 2010 7:42 am

For that pricing I highly doubt it will have a PG logo in it, or even have countersinking where the mounting screws go.

gridracer · Post by **gridracer** » Wed May 12, 2010 9:57 am

So what would be the final price on these if I bought 5

Post by **kg1961** » Wed May 12, 2010 11:13 am

gridracer wrote:So what would be the final price on these if I bought 5

for a guy with no money that sound like a big order?

tonym · Post by **tonym** » Wed May 12, 2010 1:31 pm

Eric D wrote:For that pricing I highly doubt it will have a PG logo in it, or even have countersinking where the mounting screws go.

They will be counter sunk

thats an 15$ bit that does that

As for the PG logo I would prolly run into some © infringmints or something...But That can be done(not from the ppl that will make them though) have to get the PG part waterjett'ed out..

I have him giving me a calling back I told him that I need these down to 150.00 a set

gridracer · Post by **gridracer** » Wed May 12, 2010 8:23 pm

kg1961 wrote:
gridracer wrote:So what would be the final price on these if I bought 5
for a guy with no money that sound like a big order?

It wasn't an order it was an inquiry big difference and no I can't afford 5 of them at $150 each.

Post by **Rold Gold** » Thu May 13, 2010 7:26 am

$150 each set....................no.

At that price I'm out.....

Post by **stipud** » Thu May 13, 2010 7:50 am

It's not that bad... they probably cost more than that new. What do you guys expect? Fabrication ain't cheap.

Post by **fuzzysnuggleduck** » Thu May 13, 2010 7:56 am

I'm confused.

What's the pricing? How many shrouds in a set? Does a "set" refer to each different type of shroud? Say a set of M100 shrouds, a set of M44 shrouds, etc. ?

tonym · Post by **tonym** » Thu May 13, 2010 1:48 pm

fuzzysnuggleduck wrote:I'm confused.

What's the pricing? How many shrouds in a set? Does a "set" refer to each different type of shroud? Say a set of M100 shrouds, a set of M44 shrouds, etc. ?

A set would be a right and left fan unit..

and stipud is right fabracation isnt cheap at all

What did these go for when PG had them for sale??

Post by **fuzzysnuggleduck** » Thu May 13, 2010 2:03 pm

OH!!! I thought you were talking about the metal shroud over the heatsink only, not *also* the fan units.

So to clarify: Set = Right side fan metal, left side fan metal and heatsink shroud?

Post by **mhyde71** » Thu May 13, 2010 2:15 pm

so it is the sink shroud and fan housings??

Interesting-

I think having the PG carved out of the shroud not only has aesthetic qualities to it- BUT think/willing to bet there is functional aspects to it as well. i.e. air flow out
UNLESS it is one fan pulling and other pushing...?

Which even still- i think the extra air from the "hole" in center would contribute to more air flow- perhaps?

necessary? i dunno- Ideal? perhaps...

maybe just coated w/ artwork- BUT lets see first how i fare with the newly discovered artwork application/process.

Post by **mhyde71** » Thu May 13, 2010 2:16 pm

yeah w/ it including the shroud, and two fan units... 150 is prolly a more than reasonable deal...!?

and fans should be easy to get/source

Post by **Rold Gold** » Thu May 13, 2010 2:21 pm

OK-
I'm out for $220 per set............

I read it as "20 sets for $200 plus another $20 for the sink shroud". Not a bad price to have them fab'd but I think we could do better......

We need to talk to Jcamp........

Post by **mhyde71** » Thu May 13, 2010 2:26 pm

i'd really like to see shrouds for outlaws & 66's just the same!

and @ fuzzyho
think he is trying to get shroud, and fan units for under/around 150...?

am i correct?

Fan shroud for M series

Fan shroud for M series

item

Re: item