Ti1200.1

Post by **smgreen20** » Mon Aug 02, 2010 7:07 pm

I don't recall, but is it a class A/B or D?

The manual in the archive section didn't say.

There's 2 on ebay and I half tempted in place of the Audison along w/a Ti500.4????

Post by **Bfowler** » Mon Aug 02, 2010 7:31 pm

a/b

Post by **smgreen20** » Mon Aug 02, 2010 7:33 pm

Bfowler wrote:a/b

I'm looking for a Class D.

valeks1 · Post by **valeks1** » Mon Aug 02, 2010 8:53 pm

TI1200.1 is A/B. If you want Phoenix Gold class D then is Tantrum T1200.1, Xenon X1200.1, X600.1, X400.1, RSD1200.1, RSD600.1 and Octane-R R15.0:1.

Post by **Bfowler** » Mon Aug 02, 2010 9:23 pm

the tantrum 1200.1 is a class "t" chip amp

also they made qx500.1, qx900.1, octane-r 8.0:1

valeks1 · Post by **valeks1** » Mon Aug 02, 2010 10:39 pm

Class-T and Class-D refer to the same technology. Class-T its just Tripath marketing.

Post by **smgreen20** » Tue Aug 03, 2010 7:32 am

But I was looking at the 1400 x 1 @ 2 ohm number. I'd love to have the Tantrum, but I wouldn't want to use is as she's an endangered species. The RSD would be next in line for my choice, but I'm not sure of the actual output of one.

valeks1 · Post by **valeks1** » Tue Aug 03, 2010 8:02 am

smgreen20 wrote:But I was looking at the 1400 x 1 @ 2 ohm number. I'd love to have the Tantrum, but I wouldn't want to use is as she's an endangered species. The RSD would be next in line for my choice, but I'm not sure of the actual output of one.

Xenon X1200.1 @ rated @ 2ohm 1200 watts but actual output with 14.5 V more than 1450 watts

12voltjunky · Post by **12voltjunky** » Tue Aug 03, 2010 4:21 pm

if i were going for a mega-watt setup i would likely use xenon amps. the 1200.1 is NFJ, which stands for "No FU@K#NG Joke" and the 200.4 has caught my attention big time.

just imagine this...
four rsdc10"
two xenon 1200.1
a killer 3 way setup in front powered by the 200.4
you could even add a center channel and rear fill powered by another 200.4 ???

dBincognito · Post by **dBincognito** » Tue Aug 03, 2010 4:58 pm

smgreen20 wrote:But I was looking at the 1400 x 1 @ 2 ohm number. I'd love to have the Tantrum, but I wouldn't want to use is as she's an endangered species. The RSD would be next in line for my choice, but I'm not sure of the actual output of one.

They are really not that hard to find, Matt still has these two as far as I know.

http://phoenixphorum.com/f-s-two-tantru ... 14765.html

Post by **smgreen20** » Tue Aug 03, 2010 5:05 pm

But imagine a PG XENON 200.4, 1200.1,BassCube, Audio Control DQS, Street wires fused power/ground distro block ALL fitting behind the rear bench seat and 2 12" TREO SSi12.22's under the rear bench seat in a '00 GMC Sierra Ext cab!!!!!!! Amp size is a big concern. Possibly a 1200.1 and a 100.4, but that is pushing my space limitations big time.

For all I know the Ti1200.1 and Ti500.4 might be to big,. but I KNOW the XENONs are. The new Ti2500.1/600.4 will just fit. I can relocate the BassCube to behind the glove box, which I probably will anyway.

That's one reason that the Audison is looking better and better every time.

Post by **Bfowler** » Tue Aug 03, 2010 8:15 pm

if you go xenon, you can save 4 inches by taking off the rubber boots! and 4 more by putting them in a cooling rack like my maxima install!

Post by **smgreen20** » Wed Aug 04, 2010 1:48 am

Hmmmmm!

12voltjunky · Post by **12voltjunky** » Wed Aug 04, 2010 3:23 pm

smgreen20 wrote:But imagine a PG XENON 200.4, 1200.1,BassCube, Audio Control DQS, Street wires fused power/ground distro block ALL fitting behind the rear bench seat and 2 12" TREO SSi12.22's under the rear bench seat in a '00 GMC Sierra Ext cab!!!!!!!

that oughta do it.