PG ZX plexi

[elektron]

Hello I am newbie here, say hello to everyone of this superb forum.
I have been a great fan of PG stuff for years, even though this brand is very rare here in Slovakia.
I have got only ZX series amps (2x500,2x450,1x250) and a few Xmax's and xs's sw and speakers. Please could you advise me, if it is possible to order plexi for ZX 250 and for ZX450/500?


I would like to show 2 cars of mine with PG components>


http://www.auto-hifi.sk/skoda?product_id=27

Skoda Fabia - audison VRx 6.420 - front stage 3-way full active for dyns 340, ZX450 for kicks and sub (xmax 12,then Phase Linear 12) implanted to the floor of a trunk.


http://www.auto-hifi.sk/mazda/mazda-mx-5

Mazda miata NB ,ZX-450 for Focal Utopia 165 front stage,ZX-500 for 10 inch Peerles sw in closed o.5cu ft enclosure



http://www.auto-hifi.sk/ukazky/porsche-911-4s-996

My friend's Porsche 911 4S (996 model)

PG Xenon 600.1 for JL 12W6, Xenon 200.2 for JL kicks and JL amp for front JL XR 3way

[smgreen20]

Pretty looking lady in the Mazda 5.

Those parts are getting hard to come by. I don't know if you could call PG and that they'd have any. Last I heard all things plexi, as far as OS goes, are gone.

You could try to make your own. Might not be the most cost effective way, but buy a heating lamp used to bend plexi, cardboard, and 1/8" plexi. Use the cardboard to find out the shape needed then trace that over the plexi, cut the plexi, then place it over the heat lamp to bend it. Be careful not to over heat it or you'll scar it. Depending you the year of your amp, glue it or bolt the plexi window in place.

I haven't made any myself, but I have made/bent some things out of plexi and this would be super easy to do.

AND..... Welcome to the phorum.

[kg1961]

i don't think they have anymore. i bought some of the last ones for my reactor about 3 years ago they only had the smoked one not the clear..