i have a octain R 15.0.1that is smoking

thesteve151 · Post by **thesteve151** » Sun Jun 17, 2007 10:51 pm

the white box outline on the board that goes around both the resistors says R307

the white box that goes around the one output filter that burned up says C100

and the box that goes around the other output filter says C101

1moreamp · Post by **1moreamp** » Sun Jun 17, 2007 10:58 pm

thesteve151 wrote:the white box outline on the board that goes around both the resistors says R307

the white box that goes around the one output filter that burned up says C100

and the box that goes around the other output filter says C101

The resistors are 4.7 ohm 5 watt ceramic type, the other number mean nothing as I don't have a schematic. Thats why I need the numbers on the burnt items themselves. the other numbers your giving me are location numbers and would apply if I had schematics. Sorry I need more info from the burnt item themselves

thesteve151 · Post by **thesteve151** » Sun Jun 17, 2007 11:01 pm

i think i am confused on the names of all of these.
i need all that is circled in this picture

R307: are The two resistors that are 4.7 kohm 2 watt ceramics

C100, and C101: are 5.6 microfarad 250 volt Metal film capacitors

right?

1moreamp · Post by **1moreamp** » Sun Jun 17, 2007 11:04 pm

OK the burnt resistors are 4.7 ohm 5 watt ceramic
the capacitors are 5.6 ufd at 250 volts metal film

thats it I though you were talking about the little orange ones hope this helps C

thesteve151 · Post by **thesteve151** » Sun Jun 17, 2007 11:10 pm

ok cool i just need to order them now, thanks a bunch, and i will keep you posted on how this turns out

thesteve151 · Post by **thesteve151** » Fri Jun 22, 2007 2:45 pm

update

i was able to get 2 new resistors in town, but still can't find the Metal film capacitors.
well i went to go change the resistors out in the meantime, and once i took the old ones off, i cleaned the board under them, and is is melted, bubbling up, and has a few pieces missing. so i am not even going to try fixing it now, i will just buy a new amp in 2 weeks.

i tried to get pics of the damage, but they are just to blurry to see.

i will start a new thread showing my whole system when i get the new amp.

thanks for the help

Post by **mr tibbs** » Fri Jun 22, 2007 3:45 pm

Sorry to hear that, maybe sending it in to PG directly is an option??? You might want to give them a call and see what they can do for you.

1moreamp · Post by **1moreamp** » Fri Jun 22, 2007 9:30 pm

Ill take it for parts if your tossing it ??

Sorry about the amp board being bad. I figured it was, but what the hell nothing ventured nothing gained

thesteve151 · Post by **thesteve151** » Sat Jun 23, 2007 1:31 am

sorry in already threw it out, i will give you the next amp that me or my brother blow. he also has a 15.0.1 pg, with a nice eclipse sup, so it is only a matter of time. lol