Corty75 ´s New Ti Build, Ford Mondeo Daily driver ( SOLD )

[Corty75]

Well.. This is my daily driver!
Had some gear on the shelf, so took me about 2 days to build this.


1 X 1200.1Ti
1 X 600.4 Ti <---- Couldent wait for the 500.4Ti from Drock ( On the way to me in DK ).. so picked up this one for 150$ NIB locally
2 X 12" TiD4 Subs.
4 X 5,25" Fosgate power combo´s ( one each door )
Some old school accessories from " the past "..
PG 12g speaker cable all over.
Pg Arx 300 Rca´s X 3

Purple zeropoint possitive 4g cable are from meber Bfowler! Thank you.

All Cables are wrapped in flex! ( Do not wanna cath any more fire´s )

This is my daily driver, and i am telling you guy´s, this setup is NOT something the wife is happy about! ( So im keeping it! )

Update: 8/3-2016
The ol´ Ford was fallin´apart.. so i took the stereo out, sold the car and bought myself a BMW E38 7-Serie.
Time for new project.

[dvnt88]

Nice work and gear sir ...always have and always will be a "TI WHORE" as that line is what got me into the "PG" world . I have an install coming up around September (New car for me ... ) and will consist of the following:

Audiocontrol DQ-61 (OEM interface as I'll be keeping the factory deck)

TI 500.4 (Mids and highs)
2 x Image Dynamics XS65 comps

TI 400.2 (Image tweets in the A-pillars)
1 x Image Dynamics XS28 tweets

TI 800.1 (will run her at 2ohm)
Image Dynamics IDMAX 12D4v3 in a 2.25ft^3 ported box

PG DD5
PG TI BassCUBE
PG TI pwr / gnd blocks
Kinetik 1800.


Will definitely post pics of the install once I get it going.

[vwdude]

Very nice install. Not a fosgate fan but you can be excused with the use of ti amps.

[Corty75]

Very nice install. Not a fosgate fan but you can be excused with the use of ti amps.

Haahaaaaa... The fosgate´s are fair enough!
Thanks.

Plan is to swap the Fosgate´s into 5:25 Elite combo! Havent got the fonds yet, but working on it.. it is a daily driver though

[mndevil]

Nice Install Man!!

[Corty75]

Nice Install Man!!

Thanks..
I did mke mistake though... The 4g cable is way to small, im burning agu fuses ad 100AMP to the 1200.1Ti.

Gotta upgrade to 0g wire! and some extra battery power.

[mndevil]

Nice Install Man!!

Thanks..
I did mke mistake though... The 4g cable is way to small, im burning agu fuses ad 100AMP to the 1200.1Ti.

Gotta upgrade to 0g wire! and some extra battery power.

yup, you need to upgrade your cable. Luckily you live in Europe, 0 AWG is easy to come by. Had to wait for mine 3 weeks to get it

[dvnt88]

Definitely upgrade to the 1/0g wire to the pwr block, then run 4g to the amps. Ran a 500.4 and 1200.1 running 1/0g to the block and 4g to the amps and never had a problem blowing fuses, just make sure you don't have any exposed metal-to-metal contact from the block to any metal part in the car or it'll cause a nice short and pretty sparks.

[Corty75]

Yep ... 100 Amps multipli 14,4 volt= 1440watts!!
I believe this AMP need 150 Amps fuses.
And 4g cable is capable up to 125 ad 20ft.

Forgot to calculate when i installed it..

Btw: 0g cable, where do you guys buy this? Any good suggestions ?

Sure would like some PG, but seems to be rare now :/

[Bfowler]

looks good! sorry the cable didnt work. maybe just run another 4awg alongside the purple. 1 for each amp?

[dvnt88]

Yep ... 100 Amps multipli 14,4 volt= 1440watts!!
I believe this AMP need 150 Amps fuses.
And 4g cable is capable up to 125 ad 20ft.

Forgot to calculate when i installed it..

Btw: 0g cable, where do you guys buy this? Any good suggestions ?

Sure would like some PG, but seems to be rare now :/

Hey bud, the manual states a 120 amp fuse for the TI1200.1 if you'll be running it at less than a 4ohm load , so the 4g should work out ok (if less than a 20ft run) , but always nice to have a little wiggle room.

[mndevil]

I guess you could take a look at Shok Industries Competition series, those series are pure copper. Or FLUX also good

[Corty75]

Nice to know fellas...

Bfowler: No worry´s, the 4g wire is AWESOME, i bought it because my Ti Build should have been with a 1600.5Ti.
But you know, as allways.. I wanted MORE!!

Bought a 8farad capacitor from Audiobahn today, and some Good ol´0g OFC wire!
Also got a yellowtop ( optima ) .. might throw that in the trunk

This daily driver might become a serious build now.. this was not in my mind from the beginning!

Well... Thats the side effect of the " shot of ICE in the vane "

[Corty75]

UPDATE

Got the 500.4Ti last night..

My daily driver Ti Build is Completed!

Thanks

600.4Ti now on retirement

[dvnt88]

That is one sexxy pic brother ...

[Corty75]

That is one sexxy pic brother ...

HeHe... It´s sure is!!

Kind a caught me inthis project though.. Next is to build some fiberglass and some plexiglass with a " little" LED backlight..

"Hide away" the cables most likely ..

Titanium logo in plexiglass with blue LED backlight.. think it could be awesome?

[Wigzter]

This is really nice bro!! Those Ti2 subs have to fill the cabin real nice because you don't a trunk to go through like I do. Sometimes I ride around with the back seats folded down though.

Great install man!!

Oh and my buddy found a pair of Kenwood 6.5s at Best Buy for $30 for stock systems at 30watts rms. Which fits my factory receiver perfectly. Going to get a couple pair here soon and I'll let you know how they sound.

[Corty75]

This is really nice bro!! Those Ti2 subs have to fill the cabin real nice because you don't a trunk to go through like I do. Sometimes I ride around with the back seats folded down though.

Great install man!!

Oh and my buddy found a pair of Kenwood 6.5s at Best Buy for $30 for stock systems at 30watts rms. Which fits my factory receiver perfectly. Going to get a couple pair here soon and I'll let you know how they sound.

Cool, are they coax or combo´s ?

Thanks for the comment though.. u might wanna check out my Chevy.. it won 1.st place in I.C.E ad Scandinavian Custom show!

[Droid2Global]

Hello please tell me the size of your box. I have two ti212d2.

[Corty75]

Hello please tell me the size of your box. I have two ti212d2.

Measurement in Centimeter.

110 L x 35 H x 25 D

Port is 4 inch
6 inch long

Peaks in 43 hz