Pg zero point mids
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Pg zero point mids
Hey guys,
Whats yalls opinion of the zeropoint 5.25 zmp130 mids?
Whats yalls opinion of the zeropoint 5.25 zmp130 mids?
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
Re: Pg zero point mids
as much as I loved pg I never liked their speakers short of the elite/morel line myself
what else can I say I am a grumpy asshole most of the time.
Re: Pg zero point mids
Are you looking at the ones on eBay? I've been watching those, just from a collectors standpoint. For some reason several pairs of 5.25" speakers have been on eBay over the last year, but never the 6.5" or the tweeters from the set.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Re: Pg zero point mids
Vw, yea actually ive been eyeing them too along w a few others.
What do yall think of peerless brand?
Honestly im looking for the best set of mid bass drivers for under $100
What do yall think of peerless brand?
Honestly im looking for the best set of mid bass drivers for under $100
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
Re: Pg zero point mids
I had a set of the 6 in separates in my wife's car and they sounded good. I wasn't blown away by the sound. Mid bass was ok not huge. The speakers on the other hand are. Like 5 or 6 in deep if I remember right. I hear they are better with an enclosure but I'm not sure how you could build one with the speaker already that big.
2008 toy tundra
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
Re: Pg zero point mids
I love them. I compare them to the Boston comps everyone loves so much. I had a set of the 5 1/4" comps but sold them to fund the purchase of a set of the 6 1/2" comps.
You want a great set of mids for under $100, look into the 6 1/2" Silver Flutes from madisound.com
I compare those to the Hybrid Audio L6's.
You want a great set of mids for under $100, look into the 6 1/2" Silver Flutes from madisound.com
I compare those to the Hybrid Audio L6's.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Re: Pg zero point mids
I didn't like them
Sounded ok pain to mount being so deep and little mid bass. I had a couple fail for no reason
They got replaced but there is a lot better for less
Sounded ok pain to mount being so deep and little mid bass. I had a couple fail for no reason
They got replaced but there is a lot better for less
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: Pg zero point mids
We had them at the shop I worked at and I think I can remember installing one set for a guy that was dead set on pg speakers to match his subs. It was a tough sale when you compared them to ID in the board right next to them. I think I even remember liking the alpine componants slightly better but its been a while.
what else can I say I am a grumpy asshole most of the time.
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Re: Pg zero point mids
Hey smgreen20, ive never heard the hybrid audio l6's, is there anything those would compare too?
Thanks for the input guys, i think ill prob pass on the zero points. Im hoping to find a set of 6.5 thatll play as low as 60hz but 80 will do.
Thanks for the input guys, i think ill prob pass on the zero points. Im hoping to find a set of 6.5 thatll play as low as 60hz but 80 will do.
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
- CarAudioGuru
- Posts: 41
- Joined: Fri Jul 04, 2008 9:03 am
- Location: Phoenix
Re: Pg zero point mids
Actually I built a set for a CES (I think 1997) white pearl enclosure similar to Wilson Watts Tots. 2 Layers of Ranger Board (non of that wussy MDF) 2.5 inches think on all walls, BRACED internally. Dom built custom crossovers (because of the on-axis design of home speakers, different that the car ones)
Took me 6 days to shoot the pearl paint. All a few days before CES. We also sublimated the bass by using a enclosure I designed using 1 inch thick Plex with a Cyclone in it. Sounded unbelievable. A 2.1 system. Spacious, wide, open clean....
They were REALLY good speakers. Way too deep. I thought if I built the super bitchin component system no one would care that they had to built door panels. Wow, was I wrong (not the first time...I was the one that got us to to the Cyclone too, buy the rights...whoa was that a colossal waste of money. Killer product, just not for car)
Like I say in my seminars...I went to MIT..you know......Mistakes I've Tried. I made a few of them
Took me 6 days to shoot the pearl paint. All a few days before CES. We also sublimated the bass by using a enclosure I designed using 1 inch thick Plex with a Cyclone in it. Sounded unbelievable. A 2.1 system. Spacious, wide, open clean....
They were REALLY good speakers. Way too deep. I thought if I built the super bitchin component system no one would care that they had to built door panels. Wow, was I wrong (not the first time...I was the one that got us to to the Cyclone too, buy the rights...whoa was that a colossal waste of money. Killer product, just not for car)
Like I say in my seminars...I went to MIT..you know......Mistakes I've Tried. I made a few of them

Larry Frederick
"Original PG Guy"
"Original PG Guy"
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Re: Pg zero point mids
Thanks man, i love hearing things like this.
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Re: Pg zero point mids
So i have a new set of 6.5" silver flutes on the way, should be here today matter of fact
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
Re: Pg zero point mids
Awesome speakers! I have a set of 8" Silver Flutes going in the doors of my Corvette. I am using them with SEAS Prestige tweeters and running an active setup. Amp is a ZX950. The ZX500 channels will power the mids, channels 1&2 of the ZX450 will power the tweeters and channels 3&4 will be bridged to a 12" Onyx sub. I have an Audison bit ten for processing. Just need to find time to finish the install.
Re: Pg zero point mids
That's good, let us know what you think. I've run 160w each to mine, 0 issues. Note: they NEED to be sealed or put in a ported box, I forgot to mention, they don't do well IB.knightrider358 wrote:So i have a new set of 6.5" silver flutes on the way, should be here today matter of fact
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Re: Pg zero point mids
Thanks sm, im glad to see u around. I havent seen u around for a while. I was actually off the radar for a couple yrs life is really getting to us all huh
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
Re: Pg zero point mids
I still linger, my main focus has shifted to old school car audio and an mostly on Facebook in the OS group. I still love my PG and wouldn't mind getting some more, but my Clarion and LANZAR addiction has really taken off.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Re: Pg zero point mids
Forgot to add, this is my home on the net, it's the first place I've really ever felt welcome online and there's a lot of good people here. This place will always have a spot in my heart.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
- knightrider358
- Posts: 1318
- Joined: Mon May 04, 2009 3:37 am
- Location: Virginia, Near D.C.
Re: Pg zero point mids
I 2nd that sm, its good to see u on oss, as u see me on their pretyy reg too. But as u this was and always will be my audio home
Current 1 of 2 current installs
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA
HU-Alpine IVA-D310
DSP-PXA-H701
Comps-JL ZR 650
Sub-3 JL 10w6v1ae's sealed
Highs amp-MS275
Mids amp-MS2125
Subs amp-MS2250TA