Need some help on an amp.

walker01s10 · Post by **walker01s10** » Mon Jun 08, 2009 4:21 pm

Ok I bought this amp off a guy on ebay. He said it worked but when I power it up the 4 red leds on the circuit board light up. Here are some pics. If yall know what I can do to fix this please tell me.

knightrider358 · Post by **knightrider358** » Mon Jun 08, 2009 6:16 pm

Looks like something might be faulty obviously. I know that the Ti amps "working lights" are the 3 blue leds in the triangle above where it says PG. Also I know the old er MS/MQ/MAC/and MPS line have red LED's similar to those when u remove the bottom plate, But its more to tell you the amp is operational. Now Im pretty sure its a sign of a short or something of sorts. Im sure one of the tech vets will chim in on what the lights exactly mean.

Post by **ttocs** » Mon Jun 08, 2009 7:03 pm

its funny as the other night when I looked back at my amp(LE octane) I noticed on the highs side that those same lights were on but the amp was playing....... Try hooking a speaker and a source up to it and see what happens.

dwnrodeo · Post by **dwnrodeo** » Tue Jun 09, 2009 4:04 am

I believe those LED's are to signal that everything is working properly. The Ti500.4 I had did that. When they don't light up then you have a problem.

Stryker · Post by **Stryker** » Tue Jun 09, 2009 5:32 am

dwnrodeo wrote:I believe those LED's are to signal that everything is working properly. The Ti500.4 I had did that. When they don't light up then you have a problem.

they are, hook up a speaker.....

walker01s10 · Post by **walker01s10** » Tue Jun 09, 2009 6:46 am

I thought those red led are for when there is a fault with the amp and the 3 blue leds on the cover are for when the amp is working properly. On my other 3 ti amps 2 600.2 and one more 400.2 none of the red leds like in the pics come on. Only the 3 blue leds come on and I know for a fact that those three amps work.

Anyone else have an idea or knowledge. And thanks to those that have replied.

Post by **kg1961** » Tue Jun 09, 2009 6:50 am

I have 3 install 2 400.2 and 600.2 the red light do come and stay on when the amp is working. The tri light are just for show
I had to replace one on my bmw amp as it worked fine just the lights went out

Post by **Jacampb2** » Tue Jun 09, 2009 7:33 am

Yup, the red led's are normal. They replaced a standard diode in the ZX amps signal chain. The only red LED that means bad things have happened is the one on the lower right corner of the board that says OVERLOAD. Or, if one of the little red LED's go out, then bad things have happened as well...

tristan.lafferty.73 · Post by **tristan.lafferty.73** » Wed Jan 14, 2015 7:04 am

You check your fuse? and all your hookups for good connection

Renovatio · Post by **Renovatio** » Wed Jan 14, 2015 11:24 am

your late about 7 years, things have chaned...

vwdude · Post by **vwdude** » Wed Jan 14, 2015 12:07 pm

Another femme-bot?

wooferdog · Post by **wooferdog** » Wed Jan 14, 2015 1:53 pm

tristan.lafferty.73 wrote:You check your fuse? and all your hookups for good connection

What is a fuse ??

dwnrodeo · Post by **dwnrodeo** » Wed Jan 14, 2015 3:13 pm

vwdude wrote:Another femme-bot?

For sure.

Post by **ttocs** » Sun Jan 18, 2015 2:21 am

but it can't be, I am sure that Tristan is/was in love with me and not just into my doggy-style.

Need some help on an amp.

Need some help on an amp.

item

Re: Need some help on an amp.

Re: Need some help on an amp.

Re: Need some help on an amp.

Re: Need some help on an amp.

Re: Need some help on an amp.

Re: Need some help on an amp.