Let's see your stash

[vwdude]

Updated stash picture...I didn't feel like getting out the 12" Xmax, so it's all of my pg gear minus the sub.



And these guys are in my car...


So in all I have:
Amps:
Zpa0.5- black with green terroids and original plexi -restored
Zpa0.5- black with green terroids and replacement plexi -restored
Zpa0.5- black with red terroids and original plexi -partially restored
Zpa0.5- black with red terroids and cracked original plexi -future restoration
Zpa0.5- black with red terroids and no plexi (sequential serial with previous one) -future restoration
Zpa0.5- white with green terroids and original plexi (pending sale)
Zpa0.3- black with green terroids and cracked original plexi plus replacement plexi -restored
Zpa0.3- black with green terroids and cracked original plexi plus replacement plexi- future restoration
ZX475ti- titanium, restored but not fully tested, pending trade -not pictured
ZX475ti- titanium, restored but not fully tested, pending trade -not pictured
ZX600ti- titanium, restored but not fully tested, pending trade -not pictured

Crossovers:
Zpx2- black wih window cut out and gold logo
Zpx2- black with no window cut out and white logo
Ax406a- black
Mx2- black
ZBS4- black 1 to 4 balanced splitter

EQs:
EQ232- black with original plexi cover
EQ215i- black
EQ215ix- black

Line drivers:
TBAt- black restored and upgraded with ELNA caps
TBAt- white pending sale
PLD1- black (not pictured, on it's way)
PLD1- white pending sale

Power:
DD5- black
RMD- brand new in box, black
ZBB34- black 3 in, 4 fuses, 4 out
ZBB342- black 3 in, 4 fuses, 2 out
ZBBground- black grounding block

[LowandLoud]

Mmmm, I would love a 232 plexi.

LL

[kg1961]

man I have always loved the zpa amps want to trade 2 .5 and a .3 for elite.2's?lol

[vwdude]

man I have always loved the zpa amps want to trade 2 .5 and a .3 for elite.2's?lol

Right now you don't want any of my spares. Once they are done I doubt I'll part with them so easily.

[Seanram]

Got a few new pieces for the collection.....
Also Got a Elite woofer, RSD 1200 amp and a Elite comp set.
Pictures will follow..

[vwdude]

Nice collection sea ram. What's with that bandit and the silver finish?

This just got added to my collection...

[kg1961]

(bandit) think its sun faded or just the picture I have seen a bunch like that over the years

[vwdude]

Wow, I wouldn't imagine that sun fade would do that. Isnt the heat sink anodized the same as the rest? Also, the print seems to be blue. I have no clue what color the print is usually but I wouldn't think that blue print would show up on blue anodized finish.

I honestly think it looks pretty cool.

[Seanram]

It's a combination of a bit of sunfade and my crappy foto skills .
Actualy its not as bad a iT looks in THE pictures.
But here in THE netherland its not always easy to get a hold of oldskool pg so i Cannot be picky.

[Seanram]

Btw THE print is actually green but iT looks blue Because of THE blue chassy underneath.

[Seanram]

Some of the missing pictures and some additional toy's
The search for new pieces continues..

[LowandLoud]

Nice collection sea ram. What's with that bandit and the silver finish?

This just got added to my collection...

Very nice! I also have one of those magazine/literature holders. As well as the giant surfboard logo. Mine isnt mounted to expanded metal though. I love this stuff!

LL

[vwdude]

Yea I love it too. Now I'd like to get some brochures from back in the ZPA days to fill the brochure holder with. That would just be awesome.

[Landcruiser]

Digging this one up from the dead. Pair of XMAX 8's, V1 I assume? I was wondering if the T/S specs and the box sizes given for the XMAX8 V2 on the FTP here are accurate for this sub also? I was also wondering, anyone know for sure which post is +, and which one is - ? 9 volt battery trick best? Also trying to source out a pair of the missing screw on binding posts, these ones seem to be larger than most standard ones I have seen around here. Thanks.

[trickyricky]

Easiest and fastest way is with a small battery (less than 9vdc).

[Landcruiser]

Easiest and fastest way is with a small battery (less than 9vdc).

Sounds good, thanks.

[vwdude]

Those are v2.

[Landcruiser]

Those are v2.

Thanks very much, never owned any XMAX subs before. Many visual differences between V1 and V2's?

[knightrider358]

^^^^yeppers, if the battery is correct + to + and - to - then the sub will move outward if reveresed itll move in

[vwdude]

The main one that I know of is that the leads to the voice coil are insulated on the v2 and not insulated on the v1.

I have a v2 12". + is on left and - is on right with mine. I'm sure yours would be the same.

[knightrider358]

Well finally after a few years being on here, becoming more seasoned, getting to know you all a lot better, doing more buying, selling, and trading with some of you. I have been working on a new work bench for the garage for doing to testing and repairing. So during the process I have also taken the opportunity to take some photos of all my gear. Most PG but some a few others. So anyways, over the years I think I am worthy enough to post what I currently have. so hope you guys enjoy.

[knightrider358]

Non PG gear.

[vwdude]

That's a badass collection. I used to have those MTX amps, I really liked them. I also really want to get my hands on some of those black ZX amps.

[knightrider358]

Yea that series is my absolute fav of mtx's. They prob are the most under rated amps ever built. The 2300x i have is rated 750rms bridged at 4 ohms dynamic. But they have been actually benched at around 950rms. They are absolute beasts!!!!

[knightrider358]

Oh btw thanks for the compliment too!