Okay Im to lazy to look up the manual lol.
So heres the deal. You all know I am a dsp NUT, but I want to wait for the JBL MS-8. So instead of buying something like alpine dvd player or pioneer 800prs or alpine 9887 I would prefer to buy a head unit that is of high quality to run analog to the MS-8. So the only problem is w/ my set up in the mean while I will need some active xovering.
My question about the xenon amps is this...If memory serves me right I can do this.
Send a single signal from the headunit to my x200.4. Connect to the front channels and put that switch on that allows for both inputs to get eh signal from the front inputs. Then use the fronts channels w/ a BP cross of 250hz and 60hz for the midbass. Then use the rear channels bridged to run my sub from 60hz down. Finally use the out put on the x200.4 to go to the x100.2 which will have a cross @ 250hz and run a set of coaxil on up.
PG XENON tech xover input amp question
PG XENON tech xover input amp question
Can one send others to war if hes not willing to go himself?
The Xenon aux-outs will always pass a full range signal, and they have adjustable bandpass crossovers on each channel. So yes, what you are planning is totally possible. Just set the input on the X200.4 to 2ch and away you go.
The only thing the Xenon line lacks is a 10x multiplier for highpass. If it had that, then I think the crossovers would be perfect.
The only thing the Xenon line lacks is a 10x multiplier for highpass. If it had that, then I think the crossovers would be perfect.