proper use of a tidd10

Post by **Bfowler** » Tue Dec 12, 2006 10:26 am

so what is the correct way to use one of these to power something with only a + & -? (LEDs fans, etc)

use an external relay or is there a better way?

Post by **VW337** » Tue Dec 12, 2006 10:40 am

use the swtiched 12+ and the 12- for fan or LED(s).

Post by **Bfowler** » Tue Dec 12, 2006 10:47 am

that is what i have been doing, but i was worried that that wasnt provided enough power, but if you say yay, then i will keep doing it

Post by **VW337** » Tue Dec 12, 2006 10:51 am

the switched outputs are relayed internally, only the amp remote outs are transistor outs.

Post by **Bfowler** » Tue Dec 12, 2006 10:52 am

gotcha, thanks!

slc72005 · Post by **slc72005** » Tue Dec 12, 2006 10:58 am

bfowler if you remember i asked the same question about led's and trhe fans and i was told its ok to do, and i did and never had a fuse blow

BH · Post by BH » Tue Dec 12, 2006 4:25 pm

I'm using mine to power an XM unit and a tube crossover unit and my deck and all sorts of fun stuff and having no troubles what-so-ever.