ARGHHH...women are not allowed around speakers

Post by **bdubs767** » Wed Jan 24, 2007 1:19 pm

Okay well went out to the store earlier to pick up madden 07 for the 360...

and the one time I have the grilles off my kicks my girl friend has to stick her stupid long heels and hit the dust cap of the Scan Speak 12m

and she dented it in

.

Shes not allowed in my car ever again....

Any how I was able to pop all of it back into place besides one little like 1 cm indent and I cant get it back into place.

Any way I can fix it guys? Please help a brother out....

This may call for the 12ms to move inside, god damn one thing after another.

Post by **stipud** » Wed Jan 24, 2007 1:26 pm

Hmmm... on subwoofers I used sticky material like gorilla snot or sound deadening mat to adhere to the surface, then I pulled it out very quickly. With your paper cones you will have to be a lot more careful however.

Post by **Bfowler** » Wed Jan 24, 2007 1:29 pm

if you have a shop vac, putting the hose over the code might push it out.

tell here she has to buy you a new set. put her on the street until she saves up.

Post by **VW337** » Wed Jan 24, 2007 1:36 pm

Just go lube up her B.O.B. with vicks vapor rub and tell her she cut off "completely" until she replaces your speaker and she might be in for a rude surprise if she doesn't adhere to being cut off.

Post by **bdubs767** » Wed Jan 24, 2007 1:50 pm

hmmm tape sounds scary w/ that driver....

Shop vac just maybe...just maybe.

No chance of here buying a new one sadly. Any other things I could try? Like maybe stick up the pole vent?

Post by **VW337** » Wed Jan 24, 2007 1:53 pm

bdubs767 wrote: Like maybe stick up the pole vent?

What you do in your spare time is your own business..............

Post by **bdubs767** » Wed Jan 24, 2007 2:04 pm

VW337 wrote:
bdubs767 wrote: Like maybe stick up the pole vent?

What you do in your spare time is your own business..............

normally id laugh but right now sorry I just cant...women killing 220 speaker = not to happy

Post by **stipud** » Wed Jan 24, 2007 2:05 pm

If you can't get it, leave it as is... I'll bet you can't tell the difference. And for god's sake keep the damn grilles on.

Post by **fuzzysnuggleduck** » Wed Jan 24, 2007 2:50 pm

I'm actually somewhat concerned about this happening myself but I think the bigger problem with my kicks is going to be winter shit (snow, rocks, ice, water) falling through the grilles...

Post by **Bfowler** » Wed Jan 24, 2007 2:58 pm

i could try and dig up some more closed octane grills for you.....
i will just throw them in there and if they work, then super

Post by **VW337** » Wed Jan 24, 2007 3:11 pm

bdubs767 wrote:
VW337 wrote:
bdubs767 wrote: Like maybe stick up the pole vent?

What you do in your spare time is your own business..............

normally id laugh but right now sorry I just cant...women killing 220 speaker = not to happy

If it has tits or tires it'll give you troubles. Now which is more important a warm hole or a speaker?

HoseHead · Post by **HoseHead** » Wed Jan 24, 2007 6:37 pm

bdubs767 wrote:"my girl friend has to stick her stupid long heels"

Yeah, but how do those high heels look when she's doing the "look back" or the "squat"?

I have this stuff called "Goop". It's like a clear silicon gel that stays flexible when dry. I use it everywhere. I just used it to adhere plastic clips directly to glass for a power window assembly in a car. It's 20 below here right now and the Goop is flexible and strong. Perhaps something along these lines, thinly applied, will repair the puncture. Back in the day, we used nail polish.

HH

rlockwood · Post by **rlockwood** » Wed Jan 24, 2007 7:30 pm

dont they keep the dust out just as well when they're dented?

Post by **bdubs767** » Wed Jan 24, 2007 7:33 pm

rlockwood wrote:dont they keep the dust out just as well when they're dented?

yes...but wouldnt it have some negative affects on the FR...also looks fugly

Hontzo_MD · Post by **Hontzo_MD** » Thu Jan 25, 2007 9:51 am

what material are they made of?

Post by **bdubs767** » Thu Jan 25, 2007 9:56 am

Hontzo_MD wrote:what material are they made of?

paper cone..

ydnap · Post by **ydnap** » Thu Jan 25, 2007 11:46 am

See you lot all gave me a hard time over my grilles for my 3.5" clifs without even realising why I had done it.

Sure it dont look designer but it stops some stupid slapper sticking her fishy fingers in there.

ydnap · Post by **ydnap** » Thu Jan 25, 2007 11:47 am

VW337 wrote: Now which is more important a warm hole or a speaker?

Fucking hell Errin mang don't make us choose !

Thats probably THE toughest question for a man to answer right there.

Post by **Bfowler** » Thu Jan 25, 2007 12:41 pm

all warm holes unfourtuanlty have built in speakers further north. speakers that do not turn off

Post by **VW337** » Thu Jan 25, 2007 2:04 pm

Bfowler wrote:all warm holes unfourtuanlty have built in speakers further north. speakers that do not turn off

you need this..........

Post by **stipud** » Thu Jan 25, 2007 3:30 pm

Brandon, can you post a pic of the damage? Might give us a better idea of how to fix it.

nico boom · Post by **nico boom** » Thu Feb 08, 2007 3:45 am

we used to take the smallest [and thinnest] needle we could find, heat is, bend it, and like a surgeon does, carefully bend it inside the dustcap, at precisely the center of the dent, then gently pull.
works fine with most materials. the hole in a paper cone, can be filled by a very tiny drop of wood-glue, and coloured in if necessary.
anyway, good luck, and if it doesn't work, put the needle in your girlfriend somewhere where it hurts.
nico.

ARGHHH...women are not allowed around speakers

ARGHHH...women are not allowed around speakers

Re: ARGHHH...women are not allowed around speakers

dented dustcap