power distribution.. to tweets.. ??
power distribution.. to tweets.. ??
anyone see a problem with running.. a pair of door sprks w/ tweets off an amp.. then getting the same tweets, same crossover, same freq in pillars and running them off the h/u amp.. ?? jus curious, thanks.
Have no fear, only uncertainty!
- bretti_kivi
- Shutterbug
- Posts: 1595
- Joined: Tue Aug 26, 2008 1:06 pm
- Location: Päijät-Häme or Uusimaa
lol i understand the too much treble part.. although it would only be off h/u amp.. which as well all kno isnt much.. but wouldnt it help the imaging by bringing it up higher.. ?? i mean im just curious.. and in reality it would save me money and headache to not purchase the extra set and deal w/ installation lol so im definately not against.. not using them just exploring possibilities..
Have no fear, only uncertainty!
Some people do this to raise their stage height, but you would need EQing to bring the treble level back down. Boston even makes tweeters specifically for this purpose, to go with their kits.
I wouldn't do it unless you've exhausted all other options for raising your height.
I wouldn't do it unless you've exhausted all other options for raising your height.
Last edited by stipud on Mon Oct 06, 2008 6:36 am, edited 1 time in total.
- bretti_kivi
- Shutterbug
- Posts: 1595
- Joined: Tue Aug 26, 2008 1:06 pm
- Location: Päijät-Häme or Uusimaa
then leave the tweets off the door and use the pillar ones instead.
You can get a superb stage from tweets in the kicks *if* they're up for it, and you aim them properly. Try it! Leave the passive XO outside the door, and test with the tweet on the dash and below it but aimed directly at the center of your head. YMMV!
Bret
You can get a superb stage from tweets in the kicks *if* they're up for it, and you aim them properly. Try it! Leave the passive XO outside the door, and test with the tweet on the dash and below it but aimed directly at the center of your head. YMMV!
Bret
- bretti_kivi
- Shutterbug
- Posts: 1595
- Joined: Tue Aug 26, 2008 1:06 pm
- Location: Päijät-Häme or Uusimaa
well i plan on using either a teq4/6 for 8v signal to back and also for a little added eq'ing, would that be sufficient for what they provide stip?
(daily driver here.. no going overboard) plan on running just a pair of comps/coax up front off a 100.2 and a single sub off a 400.1 (ish lol)
(daily driver here.. no going overboard) plan on running just a pair of comps/coax up front off a 100.2 and a single sub off a 400.1 (ish lol)
Have no fear, only uncertainty!