2008 Friends and Family Sale: October 18th

Post by **Rold Gold** » Sat Oct 18, 2008 11:38 am

No cube's and no RSd components were to be had.......

Deal- I'll sit here and eye-fuk this haul of goodies while yer in the corner.....

deathcloud · Post by **deathcloud** » Sat Oct 18, 2008 12:02 pm

Any word of who got the MS2125? Was STROKD there? I CANT BELIEVE u got an OUTLAW how was that not swooped up? GOD I WISH I WAS THERE! Oh well i got what i wanted

thedeal7235 · Post by **thedeal7235** » Sat Oct 18, 2008 12:05 pm

Deal- I'll sit here are eye-fuk this haul of goodies while yer in the corner.....
_________________

teamradrz1 · Post by **teamradrz1** » Sat Oct 18, 2008 12:09 pm

Fuzzy I need to get that amp to u for shipping, you checked out after me.

I scored on the Ti 12s you were looking at they made me a deal.

thedeal7235 · Post by **thedeal7235** » Sat Oct 18, 2008 12:13 pm

did anybody take a picture of the chaos? was in the warehouse, where did it all go down, how many peeps?

Post by **Rold Gold** » Sat Oct 18, 2008 12:40 pm

No pix of the chaos.....

There were probly 25-40 standing there when they opened the door.....

Post by **Bfowler** » Sat Oct 18, 2008 1:07 pm

so the good and the bad for brian...

got the x1200.1...looks practically perfect for dwn

dako - they didn't have the tld66...but i found a sld44 if you want it! $25

tom....you have fuse blocks

the new line

http://www.amazon.com/PHX-GOLD-FUSED-DI ... 946&sr=8-1

and

http://www.amazon.com/PHX-GOLD-POWER-DI ... 034&sr=1-1

they are different sizes....but complement eachother

Post by **Bfowler** » Sat Oct 18, 2008 1:10 pm

also got 2 rsdc10d4's (cosmically imperfect)

a black zbb34 (glass fuse)

a whole spool of the 3 conductor accessory wire

tmc.902's
and a couple of the new lpl's

dwnrodeo · Post by **dwnrodeo** » Sat Oct 18, 2008 1:11 pm

Mmmm... X1200.1.

You are awesome Brian! PM me the final price and payment will be sent!

Post by **mhyde71** » Sat Oct 18, 2008 1:18 pm

deathcloud wrote:Any word of who got the MS2125? Was STROKD there? I CANT BELIEVE u got an OUTLAW how was that not swooped up? GOD I WISH I WAS THERE! Oh well i got what i wanted

there was an ms2125??? in full, good to go???

dako · Post by **dako** » Sat Oct 18, 2008 1:37 pm

Bfowler wrote:so the good and the bad for brian...

got the x1200.1...looks practically perfect for dwn

dako - they didn't have the tld66...but i found a sld44 if you want it! $25

tom....you have fuse blocks the new line

http://www.amazon.com/PHX-GOLD-FUSED-DI ... 946&sr=8-1

and

http://www.amazon.com/PHX-GOLD-POWER-DI ... 034&sr=1-1

they are different sizes....but complement eachother

Ahhh man!

I really wish I had a use for the SLD44 because that would be a steal. Sadly though, I wouldn't have any use for it since I need an LD for 4 channels of mid/high, 2 channels of sub. Thanks for taking the time to look for the TLD66 though. I put an extra stamp in with the Money Order I sent, so you won't have to pay postage to mail it back. Someone should snag up that SLD44!! That's insanely cheap.

Post by **mhyde71** » Sat Oct 18, 2008 1:40 pm

Bfowler wrote: a black zbb34 (glass fuse)

Spoken for Brian???
That's one of those 0ga in and 4-4ga out?? right??
might/could want if not spoken for...

rlockwood · Post by **rlockwood** » Sat Oct 18, 2008 1:43 pm

yeah, I went for RSD components, and they were gone before I got to them... supposedly only had about 6 sets. Got some battery terminals though.. as always, the best discounts were on the accessories.

good times.

shaheen · Post by **shaheen** » Sat Oct 18, 2008 2:35 pm

Good haul boys, nice nice , keep it all in the family .

so where the prices on the pics the prices actually asked.

thedeal7235 · Post by **thedeal7235** » Sat Oct 18, 2008 2:49 pm

dako, do u already have a line driver? if not, just use the sld-44 for ur fronts, and sub? just a suggestion, i mean rear fill, is that "REAR FILL", jmho-25bux for a sld-44 is cheap! and i luv the sld 44 more than the old pld-1s, b/c they are more flexible, ie, you can run 1 rca to the sld-44, input, and still be able to use the dual outputs seperately!!!!

Post by **Rold Gold** » Sat Oct 18, 2008 3:00 pm

Yep....those were the prices.....My buddy Josh bought the clone..... I bought the Outlaw for $899....... STROKD bought the 2250.....

I'm so pissed about the components....

I needed a couple sets......

dako · Post by **dako** » Sat Oct 18, 2008 3:32 pm

thedeal7235 wrote:dako, do u already have a line driver? if not, just use the sld-44 for ur fronts, and sub? just a suggestion, i mean rear fill, is that "REAR FILL", jmho-25bux for a sld-44 is cheap! and i luv the sld 44 more than the old pld-1s, b/c they are more flexible, ie, you can run 1 rca to the sld-44, input, and still be able to use the dual outputs seperately!!!!

I'd rather have everything I need in one unit, especially for space considerations. The only place I have to mount a line driver is down in the center console, under the Scion head unit area. The SLD44 and another line driver would be too much stuff crammed in there. The TLD66 however would fit the bill perfectly, and I'd also like to have the same voltage going to both amps.

thedeal7235 · Post by **thedeal7235** » Sat Oct 18, 2008 4:27 pm

a store near me, in orlando, has had one forever, do u want me to check for you, or do u want theyre number? let me know-Christian

dako · Post by **dako** » Sat Oct 18, 2008 4:53 pm

Will you be driving by there anytime soon? If so, I'd really appreciate you looking into it. It'd be a good excuse for me to take a 2 hour round trip to do some stereo tuning on the drive over there. Thanks Christian!

thedeal7235 · Post by **thedeal7235** » Sat Oct 18, 2008 5:26 pm

im trying to save on fuel(lost job), but i will call them on monday when they open, they are off of 50, near east orlando, not far from the 408/417, i think they are called audio fashion, and ill ask what the price is-bought the owners bass cube, he i dont think ever used it , looks brand new

Post by **Wakeup** » Sat Oct 18, 2008 11:10 pm

If any of you guys are planning to lose a 10 or 12 RSDC lemme know...I am quite interested...I forgot to ask someone to pick one up for me...prefer the 12...but I can manage with a 10....Or....Just I could just deal with the eq plate from harold!

thanks!

denim · Post by **denim** » Sun Oct 19, 2008 6:47 am

Dako, I just sent our distributor an email to check on stock levels of the PG SLD44, PG TLD22, and PG TLD66. So maybe he will reply with good news.

dako · Post by **dako** » Sun Oct 19, 2008 7:41 am

Thanks Denim, that's cool of you. I dunno why I've had such a hard time tracking down the TLD66.

Post by **mhyde71** » Sun Oct 19, 2008 7:47 am

dako wrote:Thanks Denim, that's cool of you. I dunno why I've had such a hard time tracking down the TLD66.

not sure if this link will help.. but worth a shot i guess...
i just simply googled it??
I remeber not too long ago, when I was in market for one, they were all over eBay...

http://www.onlinecarstereo.com/CarAudio ... ctID=18459

Post by **mhyde71** » Sun Oct 19, 2008 7:50 am

mhyde71 wrote:
dako wrote:Thanks Denim, that's cool of you. I dunno why I've had such a hard time tracking down the TLD66.
not sure if this link will help.. but worth a shot i guess...
i just simply googled it??
I remeber not too long ago, when I was in market for one, they were all over eBay...

http://www.onlinecarstereo.com/CarAudio ... ctID=18459

20.00 cheaper here: http://www.sonicelectronix.com/item_138 ... TLD66.html