WHOLLY WHOLLY SHEEET SHEEET ... ONE OF?

[Pedi]

To be honest, I would prefer an oldschool MS1000 to that.

1) looks better
2) production amp, so no "hacks" like having to feed power wires out of the case
3) produces about the same power as all three 2125's
4) actually fits in a car

The #1 reactor is cool, but to be honest, i've seen a couple of those

1) Looks better?? Whhhaaat? This was übercool, was it not????

2) I do not see the need of feeding anything outside the case??

3) ?? 3 x 2250 produce same as 3 x 2125s?

4) buy a bigger car

[kg1961]

good call pedi
but it still looks like 3 ms2125 as it has the red coils not green???

[mhyde71]

To be honest, I would prefer an oldschool MS1000 to that.

1) looks better
2) production amp, so no "hacks" like having to feed power wires out of the case
3) produces about the same power as all three 2125's
4) actually fits in a car

The #1 reactor is cool, but to be honest, i've seen a couple of those

so those are 2125's and not 2500's?? I think I may have mispoke/mistyped before... What he expressed to me was that they are 2500's... not 2250's (sorry typo) Maybe 2125's or as advertised 2500';s

yes an I have seen a number of #1 Octanes as well (think a lot of us have).. but #1 reactor I would have to say this is my first (i think iirc)

[mhyde71]

hey matt,
just curious, what is the spec ? 2 x 250 + 2 x XXX ? Seems the triplet is combining the power of 2 MS2250 into a bigger power 2 channel amp with another MS2250 on its own

sorry about that weng.. Think i typoed as I stated ^^^^
Think they are 2500's (that's what he said they were), but others here are thinking/feeling 2125's??

As far as I know it is a 6-channel application (three 2-channels)... The wires for the middle amp appear to come through the end plate on the left side.. BUT I have asked for pic's of end plates and what exactly the deal is with respect to that.

Stay tuned....

[denim]

Would love that surfboard and reactor, but no idea how I could justify buying them.

[kg1961]

sell your dog and sub...lol just kidding!!
I am good at spending money
but 3k is like a new house in canada with the way the dollar is
and shipping would be big $$$$


does anyone know if it has a custom plexi or metal back???

[shaheen]

I see what I seee what I seeeeeeeee


4 channel amp .

1 x MS2125 for left

1 x MS2125 for right ,

1 x MS2125 for Left and right


Look at the wiring , the wires are taken from the 2nd bord to left , and the wires from the 1st board to right .

So 500 x 2 @ 4ohm and 125 x 2 @ 4ohm

or 3 channell 500 x 2 + 500 x 1

Looks nice , but in all honesty too long and the cables out the side look fugly , would have looked better i they had 2 sets of buss bars , along the amp , sepereated somehow.

[stipud]

1) Looks better?? Whhhaaat? This was übercool, was it not????
2) I do not see the need of feeding anything outside the case??
3) ?? 3 x 2250 produce same as 3 x 2125s?
4) buy a bigger car

I was talking about Matt's suggestion to trade his original MS1000 for this.

1) Yes, I think a nickel plated original MS1000 looks much better than a plain white custom amp.
2) Look at the first picture. Instead of power terminals, they had to run 4g wires loosely out of the case, in order to power the middle amp.
3) 3x2500's or 2125's in this amp produce the same power as the original MS1000 (or less!). Only 3 MS2250's in a single case would produce more power, but I do not think the heatsink could handle it.
4) Matt has a massive car already, and there's no way it would fit. It would be very at-home in your Krank Amp'n Wagen though

[mhyde71]

1) Looks better?? Whhhaaat? This was übercool, was it not????
2) I do not see the need of feeding anything outside the case??
3) ?? 3 x 2250 produce same as 3 x 2125s?
4) buy a bigger car

I was talking about Matt's suggestion to trade his original MS1000 for this.

1) Yes, I think a nickel plated original MS1000 looks much better than a plain white custom amp.
2) Look at the first picture. Instead of power terminals, they had to run 4g wires loosely out of the case, in order to power the middle amp.
3) 3x2500's or 2125's in this amp produce the same power as the original MS1000 (or less!). Only 3 MS2250's in a single case would produce more power, but I do not think the heatsink could handle it.
4) Matt has a massive car already, and there's no way it would fit. It would be very at-home in your Krank Amp'n Wagen though

true'dat - it'd only fit under my bed, and would be buying it, just to buy it and collectr and keep safe and look at... Imma go get lottery ticket tonight tho- i just need to come in second and I'd grab it for the fun of it. Otherwise 3K is out of my hobby expense range.

would be fun to have, but even if nothing was in my car... I dontthink it would/could go.. it'd have to be suspended from the roof... which certianly would be 1) a feat & 2) not sure i ever saw before... that'd be cool, but nothing I'm into doing...

[mhyde71]

I see what I seee what I seeeeeeeee


4 channel amp .

1 x MS2125 for left

1 x MS2125 for right ,

1 x MS2125 for Left and right


Look at the wiring , the wires are taken from the 2nd bord to left , and the wires from the 1st board to right .

So 500 x 2 @ 4ohm and 125 x 2 @ 4ohm

or 3 channell 500 x 2 + 500 x 1

Looks nice , but in all honesty too long and the cables out the side look fugly , would have looked better i they had 2 sets of buss bars , along the amp , sepereated somehow.

so wait.. the left & center amps are both bridged, right?? so that would be (depending on whether or not 2125 or 2500), that would be either
2500:
1 x 290W @ 4 ohms bridged (13.8V)
1 x 505W @ 2 ohms bridged (13.8V)
2125:
1 x 510W @ 4 ohms bridge (13.8V)

Cuz it looks to me that they took the right neg and left pos off each board and ran it to the terminals which they are the larger two output terminals. Becasue on those boards further up along (say the buss bars) there are the other outputs aren't there??

[stipud]

Shaheen is right. Both of the amps on the left are bridged, so you wouldn't even get 6 channels out of it. I thought they would have been smart and used an MQ430 endplate, in order to keep four channels. Now I am much less impressed with this thing.

[itchnertamatoa]

so any price on this thing yet?

line me up as well
then I'll take my MQ430 endplate and turn it into a 6 channel

gotta have this sent to C for his magicak touch I think

[Rold Gold]

And then you'll have to put wings on it to get it home Itchy.

That amp is only 5" short of the width of my cell....I mean cubicle.

[itchnertamatoa]

hehe, ya

but I think Steve's got free shipping on the space shuttle

[Wakeup]

Hehe....wish that were true itchy...hehe

[Rold Gold]

And in other news, the space shutle posted a 160.2db at the IASCA intergalactic sound off on the moon...

[andy600rr]

Def not worth selling the Nickel 1k for this Matt. I can't promise that I can find another one for ya

Sure its novel for the fact that it's a 1off custom build, but other than the fact that its in a huge length of sink, what makes it so special?? Hell, the custom screened MS275's with the EQ and such that you were watching are a PG custom thing too and at least you can do something usefull with them!!

[mhyde71]

yeah eah just over the course of one day and listening to others and stuff...its kinda lost its appeal...plus I checked my bank/credit card....doesn't look good for me

someone wanta nib ol though?
sorry wrong thread...

[marko]

yeah eah just over the course of one day and listening to others and stuff...its kinda lost its appeal...plus I checked my bank/credit card....doesn't look good for me

someone wanta nib ol though?
sorry wrong thread...

and here i was getting ready to sell a kidney

nickel ms1k....one day