pg zpa sq?

phoenixgold_icy · Post by **phoenixgold_icy** » Thu Mar 01, 2007 10:38 am

how is the sq out of it?like ti series or xenons?
gives it more then 2x300 w rms on 4ohm?underated?

Post by **AVICJR** » Thu Mar 01, 2007 11:03 am

VERY,VERY underated. Supposed to be the best SQ PG amp made.

Post by **Bfowler** » Thu Mar 01, 2007 11:06 am

the ZPA was a "car-ized" version of a carver pro audio amp....so it is quite underrated and has amazing SQ potential.

the .3 will do close to 300x2 @ 4ohms, while the .5 will do quite a bit over 300x2 @ 4ohms

Post by **AVICJR** » Thu Mar 01, 2007 11:09 am

the .3 will do close to 300x2 @ 4ohms, while the .5 will do quite a bit over 300x2 @ 4ohms

It's closer to 1000 (0.3) and 1500 (0.5) isn't it?

Post by **Bfowler** » Thu Mar 01, 2007 11:16 am

AVICJR wrote:
the .3 will do close to 300x2 @ 4ohms, while the .5 will do quite a bit over 300x2 @ 4ohms

It's closer to 1000 (0.3) and 1500 (0.5) isn't it.

well 300x2 @ 4ohms would probibly be about 500x2@2ohms on that amp....

500x2 @2ohms =1000x1 @4ohms!

so yep!

edit - wait i got confused, i was thinking .5

i don't know about 1000 on the .3......maybe 800ish.

never done it though.

i think there is a mod it keep it in high currant mode that might make that possible

phoenixgold_icy · Post by **phoenixgold_icy** » Thu Mar 01, 2007 11:18 am

found one on e-bay ,normaly i want a x200.4 or would a zpa better for my ti elite 5-1 compo?
the x200.4 is gonna be bridged for the ti elite 5-1

Post by **stipud** » Thu Mar 01, 2007 11:27 am

I would do ZPA in that case. Just make sure you have a line driver... the ZPAs only take in 8+ volts... there is no gain

Actually, you already have two Xenon amps... Just do another Xenon. Why are you bridging 400 watts to it anyways? 200 is already excessive, 100 is enough. You can run a whole 9-5-1 set PERFECTLY off of a 200.4... I see no reason to split them up. Either get a 200.4 and sell the 200.2, or get another 200.2.

Post by **Bfowler** » Thu Mar 01, 2007 11:30 am

the zpa will be more then enough for the ti 5's.

if you went with the 200.4, you could use the rear channels for a sub. the 200.4 duel bridged to a single component set would be awesome for bragging rights, but damn near pointless for a functionality standpoint

phoenixgold_icy · Post by **phoenixgold_icy** » Thu Mar 01, 2007 11:39 am

got two x1200.1 for my ti elite 12d(in future maybe a second one if i found one)
and a x200.2 for my 9m´s
but what do you mean with bragging rights?maybe you can explane in dutch?

Post by **AVICJR** » Thu Mar 01, 2007 11:43 am

bragging rights= make others jealous or envious or admire your system.

phoenixgold_icy · Post by **phoenixgold_icy** » Thu Mar 01, 2007 11:49 am

my goal is to impress people of phoenix gold,and just the look on there faces (

) is gold worth

last year when i got my spl cone with 2 xenons 1200.1´s on it , everybody that heard that was surprised that a phoenix gold woofer could make so much bass

i´m all phoenix

phoenixgold_icy · Post by **phoenixgold_icy** » Thu Mar 01, 2007 11:51 am

it´s gonna be the x200.4 then

twisted · Post by **twisted** » Thu Mar 01, 2007 12:26 pm

phoenixgold_icy wrote:got two x1200.1 for my ti elite 12d(in future maybe a second one if i found one)

here ya go

http://www.woofersetc.com/index.cfm?fus ... ct_ID=3318

phoenixgold_icy · Post by **phoenixgold_icy** » Thu Mar 01, 2007 12:33 pm

do they ship to belgium?

Mastiff · Post by **Mastiff** » Thu Mar 01, 2007 12:48 pm

call them and find out ....if not I am sure others on here would be willing to re-rout it to you in Belgium.

Post by **smgreen20** » Thu Mar 01, 2007 7:22 pm

FWIW, my ZPA0.3 modified did just under 900w X 1 @ 2 ohms at 14.6 volts. I think it was 882. A local shop shut their doors last year and they were benching all the demo'd amps. A friend of mine that worked there took it in for me.

Post by **Bfowler** » Thu Mar 01, 2007 9:00 pm

nice, do you what the mod was?

brenzbmr@sb · Post by **brenzbmr@sb** » Thu Mar 01, 2007 11:18 pm

mine was to snip the diodes that controled the voltage rails.

my 0.5 did about 1600 give or take.

i need to repair mine but im lazy

Post by **Bfowler** » Fri Mar 02, 2007 8:54 am

^awesome, thats what i thought it was.

ive always kinda wanted to run a pair of .3's mmmm

phoenixgold_icy · Post by **phoenixgold_icy** » Fri Mar 02, 2007 9:22 am

brenzbmr@sb wrote:mine was to snip the diodes that controled the voltage rails.

my 0.5 did about 1600 give or take.

i need to repair mine but im lazy

snip?
1600w rms @4ohm?

phoenixgold_icy · Post by **phoenixgold_icy** » Fri Mar 02, 2007 9:35 am

can i run my compo active?
how much is the tweeter wrms?

Post by **Bfowler** » Fri Mar 02, 2007 9:42 am

if you are running TI's...Dont run them active. that passive crossover is a work of art and you will gain NOTHING by running them active.

wait....what am i saying....yes, run them active and give me your crossover

(kidding....seriously, use the crossover, it is amazing)

phoenixgold_icy · Post by **phoenixgold_icy** » Fri Mar 02, 2007 9:44 am

ok a big no no then

gixerboy · Post by **gixerboy** » Fri Mar 02, 2007 12:23 pm

hi people
i can get hold of 4 TI12DELITE subs if there is 4 people interested,all brand new,only if they are still available
also ill ship anywhere you want as long as you pay
as for bragging rights heres what i have ready to go into my next motor.
alpine deck
pld1
tideq
9,5,1 front but with a extra set of 9`s for that bit extra punch (ti6elites also but undecided if they will be used)
3x zx475ti all bridged running fronts
1x mmats d3000.1
bass cube
audio control matrix to alter voltage after tideq 4v in 4v out

2x ti12delites

fordtough1 · Post by **fordtough1** » Fri Mar 02, 2007 2:12 pm

there is also 4 of the ti 12d elites on ebay right now. $385 I believe it was. I'll post a link if I can find them