pics of tri led replacement/600.2 rail caps-

[thedeal7235]

the 3 seperate ones ive replaced were due to being cracked, im gonna take the le octane cover off, im almost certain the led pcb on that is as the zx600.2ti(as the le octane are 2 ti 400.2), when u have a chance , or if u ever need to , take the ti 1200.1 cover off, and see if its similiar, its been about 2months since i had my last ti 1200.1, but i certain it (the led board) looked exactly as the zx600.2ti???! cant quit remember-i bought 2 extra ti led pcb for future issues, and alek, the tech who fixes the amps @pg gave me the impression they are all interchangeable,or basically will work, provided the leds are soldered in correctly

[thedeal7235]

heres a pic from december when i pulled the cover off the le octane, not sure if u can zoom here or not, but the led pcb has the resistor to the right-just like the first pic at begining of this thread for a zx600.2ti

[freshkryp69]

whats up, does anyone know the forward voltage for all 3 led's. power/themal/overload for a zx450v2..I plan on ordering them from digi-key. the amp I bought is missing them...it was a craigs list buy...
ive searched here and havent found the info I need..
thanks
Brad

[dBincognito]

whats up, does anyone know the forward voltage for all 3 led's. power/themal/overload for a zx450v2..I plan on ordering them from digi-key. the amp I bought is missing them...it was a craigs list buy...
ive searched here and havent found the info I need..
thanks
Brad

T1..... 3.5 volts

The thermal and overload lights could be different colors b/c they only come on when something goes wrong With that in mind you could get these from Digikey for next to nothing and they ship quick

http://digikey.com/

67-1754-ND is green
67-1747-ND is blue
67-1690-ND is white

You can use the green for power on like stock
the white for thermal
and the blue for overload
or blue for thermal and white for overload your choice....but it wouldn't cost much and they deliver quick