Working on my ZX display

Need help with your car stereo system? Have a technical question? Post here.
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Working on my ZX display

Post by Johns98TA »

Here is what I have done so far with my ZX stuff. Thought I would show you guys now and get some feedback. I bought a 215ix, but I don't have it yet. Anything else Im missing? Suggestions on layouts? I was considering wiring up all the amps and accessories (for display) like I did with the MS1000. Is the look worth the extra cost and effort?
Amps:
DSC01817.JPG
Accessories:
DSC01820.JPG
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14793
Joined: Fri Dec 19, 2008 9:53 pm

Re: Working on my ZX display

Post by ttocs »

my only suggestion is that the line driver in the back of the car will be useless as it will amplify any noise, just as much as it will the signal. As close to the head unit as possible.
what else can I say I am a grumpy asshole most of the time.
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Re: Working on my ZX display

Post by Johns98TA »

Excellent point, but this is just a product display not an install.
:)
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
vwdude
Posts: 1846
Joined: Sun Mar 31, 2013 11:55 am
Location: So cal

Re: Working on my ZX display

Post by vwdude »

That's a cool display. You can't do anything more creative with the amp board? Maybe get a black zx to mix
It all up and throw it in there. That would make it more like modern art.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
LowandLoud
Posts: 601
Joined: Sat Sep 08, 2012 6:52 am
Location: Cambridge Ont., Canada

Re: Working on my ZX display

Post by LowandLoud »

It looks like you have all of the products covered. The only other thing you could add would be this. Its not for sale though :D

Image

LL
Always looking for:

Install accessories
LE amps
Processing
Unique pieces
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Re: Working on my ZX display

Post by Johns98TA »

Very cool piece, did you make it? It says tantrum, so Im out, but I do like the white!!
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
groundpounder
Posts: 135
Joined: Thu Mar 07, 2013 12:24 am
Location: Ohio

Re: Working on my ZX display

Post by groundpounder »

Nice display John. I think adding the cable will inhance the display a great deal, and would be worth it.
User avatar
PhuckinGood
Posts: 245
Joined: Tue May 24, 2011 1:00 pm
Location: Bournemouth, England

Re: Working on my ZX display

Post by PhuckinGood »

Very nice collection, maybe a ZX200 on the top row would balance it out?

Loving the ZX500 and that white DD5 want one!
Alpine CDA-9886R
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
brinrose
Posts: 34
Joined: Fri Jun 29, 2012 8:13 am

Re: Working on my ZX display

Post by brinrose »

a idea I came up with is see if u can get a wall paper like the pg shrine has to use ase a backing instead of the basic carpet also was curious u still have the ms 1000 or know any one looking to sell one working or broken is good too ... brian
LowandLoud
Posts: 601
Joined: Sat Sep 08, 2012 6:52 am
Location: Cambridge Ont., Canada

Re: Working on my ZX display

Post by LowandLoud »

Johns98TA wrote:Very cool piece, did you make it? It says tantrum, so Im out, but I do like the white!!
Thanks. No i didnt make it. PG did. As far as i know, this is a 1 off. I love the features of the DD5/10 and because the plan was to use all M series in my install, this will match pretty well. Yes, it is a Tantrum but i think this will look better than a black one when everything else is white.

LL
Always looking for:

Install accessories
LE amps
Processing
Unique pieces
User avatar
Drock
Posts: 1846
Joined: Wed May 23, 2012 4:44 pm
Location: Canada

Re: Working on my ZX display

Post by Drock »

Damn that's cool. I have a pair of white tantrum amps. Wish I had a white dd5.


Sent from my iPhone using Tapatalk
User avatar
Drock
Posts: 1846
Joined: Wed May 23, 2012 4:44 pm
Location: Canada

Re: Working on my ZX display

Post by Drock »

Very nice gear.


Sent from my iPhone using Tapatalk
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Re: Working on my ZX display

Post by Johns98TA »

maybe a ZX200 on the top row would balance it out?
I have looked for a ZX200, but the only one I could find was in Europe and it was very expensive. Got one for sale cheap? Like $100-$150?
also was curious u still have the ms 1000 or know any one looking to sell one working or broken is good too
You mean this one? Sorry, not for sale. :wink:
DSC01846.JPG
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
groundpounder
Posts: 135
Joined: Thu Mar 07, 2013 12:24 am
Location: Ohio

Re: Working on my ZX display

Post by groundpounder »

Sweet...
User avatar
Drock
Posts: 1846
Joined: Wed May 23, 2012 4:44 pm
Location: Canada

Re: Working on my ZX display

Post by Drock »

Very sweet.


Sent from my iPhone using Tapatalk
vwdude
Posts: 1846
Joined: Sun Mar 31, 2013 11:55 am
Location: So cal

Re: Working on my ZX display

Post by vwdude »

So where is all of this wall art going up in? Bedroom, living room, man cave?

I'd take your wall art over any Picasso any day of the week.

Oh, you may want to add an AX406 on that processor board. There's even a spot for it.

http://www.ebay.com/itm/Phoenix-Gold-AX ... 4ad0d6d876
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
groundpounder
Posts: 135
Joined: Thu Mar 07, 2013 12:24 am
Location: Ohio

Re: Working on my ZX display

Post by groundpounder »

Were there any fuse holders or distros made in that Color scheme?
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Re: Working on my ZX display

Post by Johns98TA »

So where is all of this wall art going up in? Bedroom, living room, man cave?
Bedroom and basement living room. As I get more stuff I will spread it around the house.
Were there any fuse holders or distros made in that Color scheme?
Not that I have seen. It would be pretty easy to paint some of the cool ones white though. Problem is, those little distro blocks are expensive!! Maybe someday down the road I will get a couple. Right now Im focusing on amps and processors.
Oh, you may want to add an AX406 on that processor board. There's even a spot for it.
That spot is taken by an EQ 215ix. All of the AX crossovers I have seen have the older MS style artwork on them. This display is all ZX artwork in my mind.
The next one Im building is going to be MS stuff. I already have a 2250 and a 275, and Im looking for a decent original 2125 if anybody has one for sale. I missed the one on ebay that just went for $230...dammit
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
groundpounder
Posts: 135
Joined: Thu Mar 07, 2013 12:24 am
Location: Ohio

Re: Working on my ZX display

Post by groundpounder »

I am assumeing your MS display will contain all white amps?
LowandLoud
Posts: 601
Joined: Sat Sep 08, 2012 6:52 am
Location: Cambridge Ont., Canada

Re: Working on my ZX display

Post by LowandLoud »

Drock wrote:Damn that's cool. Wish I had a white dd5.

I actually traded the DD5 i bought from you awhile back for this one.

LL
Always looking for:

Install accessories
LE amps
Processing
Unique pieces
User avatar
Drock
Posts: 1846
Joined: Wed May 23, 2012 4:44 pm
Location: Canada

Re: Working on my ZX display

Post by Drock »

It's very. Cool. I love your whole collection.


Sent from my iPhone using Tapatalk
LowandLoud
Posts: 601
Joined: Sat Sep 08, 2012 6:52 am
Location: Cambridge Ont., Canada

Re: Working on my ZX display

Post by LowandLoud »

Thanks man. Its taken some time (and a pile of money) but i have almost every piece now to do a FULL PG build 8) Just a VB200 left to aquire.

LL
Always looking for:

Install accessories
LE amps
Processing
Unique pieces
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Re: Working on my ZX display

Post by Johns98TA »

Got the 215ix added into the display. All the holes are drilled, and the board is ready for carpet.
DSC01874.JPG
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
User avatar
Johns98TA
Posts: 120
Joined: Wed Mar 19, 2008 12:38 pm

Re: Working on my ZX display

Post by Johns98TA »

Done with ZX stuff. Now working on MS series...
DSC01895.JPG
DSC01897.JPG
MS1000 Nickel on display
ZX500v2, ZX450v2, ZX350v2, ZX250v2 on display
EQ232, EQ215ix, PLD1, MX2, MX3i, TBAt, Bass Cube on display
MPS2500, MPS2240, and MS275 on display
EQ230, EQ215x, PLD1, TBA1, AX204A, AX406A on display
vwdude
Posts: 1846
Joined: Sun Mar 31, 2013 11:55 am
Location: So cal

Re: Working on my ZX display

Post by vwdude »

That looks great!
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Post Reply