Elite amplifier plexi
Elite amplifier plexi
anyone know of a source for smoked or clear plexi for elite amplifiers, I know i can just go down the local hardware store, but wondered if there was something specific out there. these boards are just to pretty to have behind dark glass...
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
I go to home depot or ace hardware myself.
what else can I say I am a grumpy asshole most of the time.
Re: Elite amplifier plexi
Did you do clear or smoked?
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
I have found both there depends on what I needed at the time. If your looking to dress up an elite just get a satin/clear vinyl decal cut and put it on the inside of the smoked plexi. When the light hits it it will light up and look like its floating.
what else can I say I am a grumpy asshole most of the time.
Re: Elite amplifier plexi
Good idea. My wife makes vinyl stickers, I'll have design something custom.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
I have a plexi guy that cuts it with a laser cutter and he recreated the old pg logos, and he can etch them into the plexi.
Go to http://www.phoenixgoldregistry.com/parts.html and you'll see a picture there.
Go to http://www.phoenixgoldregistry.com/parts.html and you'll see a picture there.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Re: Elite amplifier plexi
vwdude wrote:I have a plexi guy that cuts it with a laser cutter and he recreated the old pg logos, and he can etch them into the plexi.
Go to http://www.phoenixgoldregistry.com/parts.html and you'll see a picture there.
Thanks, that looks cool. You seem to be the guy to ask. What do you think the chance is to get a custom case/heat sink from Phoenix gold? I have two elite .5's would love to get one heat sink to put them in. Make my own ZEN 9, or really ZEN 10 i guess.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
from pg?! Its been years, decades really since they did any custom amp work....
what else can I say I am a grumpy asshole most of the time.
Re: Elite amplifier plexi
I just emailed support, we'll see if they respond. It would make for a cool one off configuration.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
Update. I did get a response. kudos PG. That said, it wasn't the response I hoped for.... oh well, never hurts to ask.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
Yea it sucks that now that I could afford one of their 1-off gear that I can't get it. There are plenty of us doing our own custom stuff here. What are you wanting to have done to it?
what else can I say I am a grumpy asshole most of the time.
Re: Elite amplifier plexi
would love to make two into one. a heat sink big enough for two elite .5 boards.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
They said all elite amplifiers were made, no heat sinks yet to cut. I asked for the name of their heat sink manufacturer, no response.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
your not going to get any real help from them. I don't think I remember them doing anything custom from the ZX line on and that was long long ago. It doesn't mean you can't put two together, just not with pg. We have seen people weld two cases together to make a ZX950 and others completely fab their own case up. Hell we have one guy that can sell you pieces of the MS/MQ/mps sinks that he had custom made.... Its pretty neat to see what people can do and most of us here are willing to help you if we can.
what else can I say I am a grumpy asshole most of the time.
Re: Elite amplifier plexi
If I can get the name of the company that supplies the heat sinks that would be a start. They should still have the die's used.
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
That will never happen it's in China they do not want others to have it it would be like asking bmw who make the body rim for the car so you can get a one off
Waste of time
Waste of time
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: Elite amplifier plexi
actually the Elites come from Korea, and Im pretty sure the heat sinks are not a PG proprietary design. That being said, with enough searching you might be able to find the supplier and customer order one. You will have to figure out though how to move the terminals that would fall in the center of the amp.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Re: Elite amplifier plexi
MY thought was not to mover them. if i can get a heat sink 3" or 4" longer then needed, then put the power/speaker wire sides of each together, I could hook up as normal sending the wires down through the amp rack. this also leaves all the controls easily accessible. I did get a response from PG that they are looking into the possibility. another question, has any one attempted changing out the 3 blue LED's with another color?
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
i removed mine and added strips to the sides.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Re: Elite amplifier plexi
that looks great
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Re: Elite amplifier plexi
That is so cool. you totally changed the look of them. did you sand them? or was it a chemical process?
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
Thanks. I used sand paper. One could use lye but I wanted to have the brushed look.
I feel that normally they look like giant iPhones. Now at least it looks like an amp, even a high end amp.
I feel that normally they look like giant iPhones. Now at least it looks like an amp, even a high end amp.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Re: Elite amplifier plexi
what are you putting them in?
Old guy who forgot how fun car audio was till my son got his first car and found my stash.....
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
current system:
Clarion 807
(2) Phoenix Gold Elite .5
Focal 165 AS3
focal 130 AS
(4) Kicker L7 10"
Bit one
Soon to come
8" midbass in kick pannels
Re: Elite amplifier plexi
Probably my next daily driver. I'm currently running a pair of ZPA0.3s and a ti2 2000.1.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.