Newb saying what's up from KS. *PICS* of car

spoolinfusion · Post by **spoolinfusion** » Wed Jul 25, 2007 9:27 am

Hello, my name is Ryan Sauer. I'm from Wichita, Kansas. I work with twisted and fordtough1 @ the same Ford dealership. I have been talking to twisted about my '07 Fusion I'm getting ready to put a double din touch screen and stereo in. I have pretty much made up my mind on all the RSD stuff. Thought you guys might be interested in seeing what the car looks like so far.

I bought it in September of '06 with 28 miles on it. Debadged it, put the 20's, tint, lowering springs, grill, intake, tune and exhaust on it before I had my first oil change.

I'll list all the stuff I plan on getting for the PG setup later tonight. Just wanted to get out there, ya know?

L8r.

spoolinfusion · Post by **spoolinfusion** » Wed Jul 25, 2007 9:27 am

eyesofra · Post by **eyesofra** » Wed Jul 25, 2007 9:36 am

nice .........and welcome

Post by **Bfowler** » Wed Jul 25, 2007 9:38 am

i normally despise American cars, but that's pretty hott.

welcome

what are the motor options on the fusion?

Post by **VW337** » Wed Jul 25, 2007 9:43 am

Nice.

I have to say the Fusion is one of the few Fords I would own. Take a look at the one HPA motorsports did.

http://www.xplodsony.com/article/Black+Sheep

not a fan of the audio used but the car is sexy......

Welcome to our herd.

twisted · Post by **twisted** » Wed Jul 25, 2007 9:52 am

what up ryan

twisted · Post by **twisted** » Wed Jul 25, 2007 9:56 am

the fusion offers a 2.3 i-4 or a 3.0 dohc v-6, but the lincoln zephyr offers a 3.5 dohc v-6

Post by **Francious70** » Wed Jul 25, 2007 10:18 am

Ohhhhhhhhhhhhhh niiiiiiiiiiice

fordtough1 · Post by **fordtough1** » Wed Jul 25, 2007 11:36 am

Hi Ryan.

The exhaust tips are uneven.

spoolinfusion · Post by **spoolinfusion** » Wed Jul 25, 2007 12:40 pm

fordtough1 wrote:Hi Ryan.

The exhaust tips are uneven.

To hell you go sir.

THanks for the 'ments guys

spoolinfusion · Post by **spoolinfusion** » Wed Sep 05, 2007 12:06 am

[IMG]

Post by **Wakeup** » Wed Sep 05, 2007 1:47 am

slick! I likey.

BTW I got another RSD 1200.1 for sale if you need!

twisted · Post by **twisted** » Wed Sep 05, 2007 4:31 am

damn yo lookin pretty good

when will i get to hear it?

nico boom · Post by **nico boom** » Wed Sep 05, 2007 6:16 am

Welcome here.

Just enjoyed your pics; looks like you've been looking at some audio-stuff before.. nice job!
Also like the looks of the car; that smiling grille just says; out of my way, or I'll eat you alive...

And last but not least; the right brand is all over your install!! keep it up.
nico

Post by **stipud** » Wed Sep 05, 2007 6:27 am

Bare feet in the garage?

Moved thread to installs section.

Post by **Francious70** » Wed Sep 05, 2007 6:29 am

Nice nice. I like what I'm seeing.

fordtough1 · Post by **fordtough1** » Wed Sep 05, 2007 8:11 am

Looks good mang. Can't wait to see it done...

ydnap · Post by **ydnap** » Wed Sep 05, 2007 8:31 am

Very nice. Like the plain-ness to the exterior.
Love those rims, theyre very similar to mine, and the billet is just fucking SICK

Really nice job on that

ydnap · Post by **ydnap** » Wed Sep 05, 2007 8:33 am

Oh, tint those tails man !

nico boom · Post by **nico boom** » Wed Sep 05, 2007 11:02 am

hahaha!!! saw the bare feet as well, relaxed mood IMO, AND ALSO... a engine of a four-stroke honda [moped]?
You have all kind of good stuff lying around in your garage man!

If I might add; try fraising the woofer-holes in your next sub enclosure; I'm sure you'll love the feeling of fitting your speakers into exact round holes.
Never used a jig-saw again after I started fraising.
Pls keep posting pics as you progress; I very much enjoy pics of people who just go the extra mile for reaching their goal.
[bare feet or not]

nico

spoolinfusion · Post by **spoolinfusion** » Wed Sep 05, 2007 12:40 pm

nico boom wrote:hahaha!!! saw the bare feet as well, relaxed mood IMO, AND ALSO... a engine of a four-stroke honda [moped]?
You have all kind of good stuff lying around in your garage man!
If I might add; try fraising the woofer-holes in your next sub enclosure; I'm sure you'll love the feeling of fitting your speakers into exact round holes.
Never used a jig-saw again after I started fraising.
Pls keep posting pics as you progress; I very much enjoy pics of people who just go the extra mile for reaching their goal.
[bare feet or not]
nico

The motor is from my Chinese replica Honda 50. Bent exhaust valve

I'll be putting on the 138cc oil coiled lifan motor off ebay once the stereo stuff is buttoned up here within the next week.

On the sub-hole cutting thing. I had perfect 10.9" circles drawn, but when I got the dremel out, I couldn't find the guide the connects to the shaft deal that goes to the dead center of the circle....so... I had to free-hand it. Fortunately there is plenty of wood to pre-drill and tap into with woodscrews safely. The right sub fits tight, but the left has a slight bit of up and down play, so I'll have to center it.

I'm getting the my grommets and wood screws and sheet metal screws for the amp rack @ Home Depot tonight. Hopefully they'll have what I need in black, if not there's always paint

spoolinfusion · Post by **spoolinfusion** » Wed Sep 05, 2007 12:47 pm

ydnap wrote:Oh, tint those tails man !

I'm working on it

I want it to be perfect when I Nightshade the oem ones. I actually had taillights I bought from work and seperated, sanded off the chrome insert, painted black and sealed it back up. It wasn't up to par (call me a perfectionist). When I resealed it, it looked kind of sloppy. So I'll practice my Nightshade skills on it before I pull the stockers. I wish (and I hate saying these 3 letters) APC would make me some. I should send them a picture. I'll throw a pic of one of the black housing ones up on here when I get home from work and can put them on my photobucket account. They would have been 1-off if I could have got-r-done. Oh well..

ydnap · Post by **ydnap** » Wed Sep 05, 2007 1:04 pm

I did the oven bake/crack apart with my heads and corners. It's well worth it man.

Yeah APC's stuff is pretty shit. My seats are APC but hey, @ $100 for the seats (brand new) with RCI harnesses worth over $300 (also new) I couldnt complain.

Be careful with the nightshades. It's soooo easy to go from grey to all out black in that one extra coat lol.

I have tinted tails, but mine are bonafide Kspec covers (you bake off the OEM tail covers in the oven and then the Kspec replace them. And theyre the shizz.

Infact, have a look around, you may find you can buy pre tinted covers...

Seriously tho, I absolutely fucking LOVE that billet front end. I had no idea that was a Fusion at first, it kinda looked like an Audi.. Great choices so far.

Dale H · Post by **Dale H** » Thu Dec 13, 2007 3:15 pm

Go Kansas!!! I have family in Whitewater. Cousins are Cops there in Wichita

BG_001 · Post by **BG_001** » Thu Dec 13, 2007 4:05 pm

good lookin install. great looking car. that grill gives it a real nice look. and good selection on the equipment used.

keep the pictures coming.

Newb saying what's up from KS. PICS of car

Newb saying what's up from KS. PICS of car

I was busy over Labor Day Weekend PICS

Newb saying what's up from KS. *PICS* of car

Newb saying what's up from KS. *PICS* of car

I was busy over Labor Day Weekend **PICS**

Newb saying what's up from KS. PICS of car

Newb saying what's up from KS. PICS of car

I was busy over Labor Day Weekend PICS