Xenon LPL question....

Post by **Rold Gold** » Mon Oct 20, 2008 9:46 am

Is there a way to run 2 600.1's on 1 lpl?????

What I thought was that if you went from the HU to the "master" amp(600.1) and set all the XO levels and then run out of the master to a "slave" amp(600.1 set to pass-thru) and it would use the master settings.... Thus only having to use 1 LPL to control both amps.....

Am I off my rocker??????

Post by **Bfowler** » Mon Oct 20, 2008 9:48 am

nope....thats how you do it dude. good jorb

although i don't know if they have a crossover defeat...but you arent using it for 1 sub with mulitple coils...so you should be fine

thedeal7235 · Post by **thedeal7235** » Mon Oct 20, 2008 9:49 am

i think you can, look at the pg manuels under car audio- i think , it shows using a single lpl-44 for a ti or muitple amps, but believe it would work for any pg amp that accepts lpl-44; as a matter of fact when i used two rsd 1200.1, i used the tech diagram for the ti amps using one lpl-44 to control multiple amps, and IT DID WORK!

Post by **Rold Gold** » Mon Oct 20, 2008 10:05 am

It's Nick's 4-15" solo rounds in the FOCUS hatch......2-600.1's and a 200.4...

We couldn't get it to work......

Post by **stipud** » Mon Oct 20, 2008 10:07 am

You can use a phone cable splitter as well.

Post by **Rold Gold** » Mon Oct 20, 2008 10:13 am

I was gonna ask about that too....... I thought I'd read about that but.....

.........

Post by **stipud** » Mon Oct 20, 2008 10:17 am

Here it is:
http://download.phoenixphorum.com/TechS ... litter.pdf

For ZX amps you had to use two conductor wires and a cable between the - terminals. For all others you can use 4 conductor and no need for the extra wire.

Post by **Rold Gold** » Mon Oct 20, 2008 9:59 pm

Works!!!!! It looks like SHIT but fuk is it loud!!!!!!

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Mon Oct 20, 2008 10:43 pm

just going 2 say it looks so loud i can hear the fkn pic!! what kinda ride is it in?

gkitching · Post by **gkitching** » Tue Oct 21, 2008 3:28 am

Ratty SPL vehicles. Gotta lovem

Gotta love the oldschool solo's too!

Post by **Rold Gold** » Tue Oct 21, 2008 5:31 am

2001 Focus........

He just couldn't help himself after the sale......Plus he'd just gotten the focus back on the road.... His fronts are pretty bright off that 200.4 I might add..... I planted the seed to get 2 more 600.1's......

dedlyjedly · Post by **dedlyjedly** » Tue Oct 21, 2008 11:03 am

I would recommend that you use the phone-splitter method for what you're trying to accomplish. I've never had good luck using the rca pass-thru to accomplish this because of differences in the preout voltage levels of your source and the amp's output. You can compensate with gain, but why would you?

I do plan on using the pass-thru on some of my Ti amps to not only provide a low pass filter for my MS but to also pass-thru an LPL signal. I'm actually pretty excited about that prospect.

denim · Post by **denim** » Wed Oct 22, 2008 10:38 am

I will always regret selling my round solo 15.